SWW044THAD-6X653ULU620
These washable miniature toggle switches with plain bushing are specially designed for flow soldering at 260°C during 5 seconds owing to high-temperature polymer parts.
Specifications
General Specifications:
- Mechanical strength : Terminals are strengthened by a bracket or a ground plate ensuring the rigidity of the switch on the board. Actuator strength is 10 N max.
- Soldering - thermal shock :The switches are especially designed for flow soldering at 260 °C during 5 seconds owing to high temperature polymer parts.
- Solderability : The switches are tested at 235 °C according to IEC 68-2-20 after accelerated aging
Environmental Specifications:
- Operating temperature : -20 °C to +85 °C
- Storage temperature : -40 °C to +85 °C
- Moisture : The insulating materials employed and the complete seal permit the switches to withstand a 56 days moisture test (IEC 68-2-3).
Electrical Specifications:
- Max. current/voltage rating with resistive load :- silver contacts (A or 1) : 4 A 30 VDC- gold plated brass contacts (CD or 0) : 0.4 VA 20 VAC or DC- gold plated silver contacts (AD or 2) : 4 A 30 VDC (300 mA 30 VDC for gold plating)
- Initial contact resistance : 10 mΩ max.
- Insulation resistance : 1,000 MΩ min.
- Dielectric strength : 1,000 Vrms 50 Hz min.
Materials:
- Case and cover : UL94-VO, polyamide, glass filled or PES
- Actuator : brass, nickel plated
- ContactsCD or 0 : brass, gold platedA or 1 : silverAD or 2 : silver, gold plated
- Terminal seal : epoxy
Added to Your Cart