AV19C703D200K
The AV19C703D200K Panel Switch is here to make your life easier. With its sleek design and reliable performance, this switch is perfect for any application requiring pushbutton functionality. The terminals are soldered for a secure connection, ensuring that your switch stays in place even in the most demanding environments. The bushing and actuator materials are made of nickel plated brass, providing durability and longevity. Don't settle for anything less than the best - choose the AV19C703D200K Panel Switch for all your pushbutton needs.
Key Features
- Electrical Functions: Normally Open (NO)
- Bushing Actuator Materials: Nickel-Plated Brass
- Contact Materials: Gold-Plated
- Illumination: No.
- Case: C7
- Sealing: IP65
- Terminals: Solder Lug
Specifications
Distinctive Features:
- Tactile feedback
- Illuminated or non-illuminated
- Momentary (NO)
- Marking available
General Specifications:
- Travel : 0.7 mm (.027) ±0.1 mm (.003)
- Torque : 1.5 Nm min.- 4 Nm max. applied to nut
- Panel thickness : 1 (.039) to 6 mm (.236) max.
- Hand soldering : 270 °C, 3 seconds max.
- Panel cut-out : Ø 19.2 mm (.755)
- Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181)
- Operating force : 7 N ±-2 N
Environmental Specifications:
- Operating temperature : -30 °C to +70 °C
Electrical Specifications:
- Max. current/voltage rating with resistive load : 50 mA 24 VDC
- Initial contact resistance : 100 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 500 Vrms 50 Hz min. between terminals2,000 Vrms 50 Hz min. between terminals and frame
- Electrical life : 1,000,000 cycles at full load
- Operating force : 7 N ±-2N
Added to Your Cart