3440SAL620
The 3440SAL620 Joystick is a versatile and reliable input device that delivers precise control for a wide range of applications. With its ergonomic design and intuitive functionality, it offers a seamless user experience. The Gain feature allows users to adjust the sensitivity of the joystick according to their preference, ensuring optimal control. The Limiter feature provides a square-shaped restriction, enabling users to define the limits of movement for enhanced precision. The Handle is designed with comfort in mind, allowing users to grip the joystick comfortably for extended periods. The Bezel, with its square drop-in design, provides a secure and seamless integration into any control panel or console.
Key Features
- Series: 3
- Gain: ±40%xV
- Bezel: Square (drop-in)
- Handle: Third Axis
- Limiter: Square
- Modifier: Guided Feel
- Configuration: Inverse Dual Outputs
- Handle: AL
Specifications
Distinctive Features:
- One, two or three axis
- Analog or PWM outputs
- Low profile less than 20 mm below panel depth5 V or 3.3 V operation
- Metal mechanism
General Specifications:
- Life Cycles: 10,000,000 cycles (5,000,000 for 3 axis joysticks)
- Seal Above Panel: IP66 (dependant on configuration)
Environmental Specifications:
- Operating Temperature: -25ºC to 70ºC (-13ºF to 158ºF)
- Storage Temperature: -40ºC to 70ºC (-40ºF to 158ºF)
- EMC Emission: Complies with EN 61000-6-3:2001, CISPR 22:2005, Class B 30MHz–11GHz
- ESD: Complies with EN61000-4-2 (extended) ±8KV (20 contacts) & ±15KV (20 air discharges)
- EMC Immunity: 100V/m, 80MHz-2.7GHz, 1KHz 80% sine wave modulation, EN 61000-4-3 (extended)
- Vibration: 100Hz – 200Hz @ 0.13g /Hz, total 3.6gRMS (1 Hour in each of the three mutually perpendicular axis)
Electrical Specifications:
- Gain (Output Voltage Span): ±10% x V to ±50% x V
- Output at Center: V/2 ±(5% x Gain)
- Power Supply: 5V ±0.5V Transient free (Configs 1, 3, 4 & 5) or 3.3V ±0.1V (Config 2)
- Center Tap Impedance: 1K1
- Center Detect Output: Pulled high within joystick via 2K2 to +V, and smoothed to 0V with 100nF
- Sensor Type: Hall effect
- Analog PWM CAN J1939 & CANopen outputs
- Current Consumption: 5V <13mA (Two axis) <20mA (Three axis) 3.3V <24mA (Two axis) <40mA (Three axis)
- Loads: Minimum 10K, preferred 100K+
Added to Your Cart