3140SBL420
Introducing the 3140SBL420 Joystick, a versatile control device that combines functionality and ease of use. With the Part Number 3140SBL420, this joystick is designed to provide precise control and smooth operation in a variety of applications. The Gain feature allows users to adjust the sensitivity of the joystick, ensuring optimal control and accuracy. The Limiter feature adds an extra layer of safety by restricting the range of motion, preventing any accidental oversteering. The ergonomic Handle provides a comfortable grip, allowing users to operate the joystick for extended periods without fatigue. The Bezel, with its sleek circular design, seamlessly integrates into any panel, adding a touch of sophistication to your control system. Upgrade your control experience with the 3140SBL420 Joystick.
Key Features
- Series: 3
- Handle: Round
- Handle: BL
- Modifier: Guided Feel
- Bezel: Circular (below panel)
- Gain: ±40%xV
- Limiter: Square
- Configuration: Standard
Specifications
Distinctive Features:
- One, two or three axis
- Analog or PWM outputs
- Low profile less than 20 mm below panel depth5 V or 3.3 V operation
- Metal mechanism
General Specifications:
- Life Cycles: 10,000,000 cycles (5,000,000 for 3 axis joysticks)
- Seal Above Panel: IP66 (dependant on configuration)
Environmental Specifications:
- Operating Temperature: -25ºC to 70ºC (-13ºF to 158ºF)
- Storage Temperature: -40ºC to 70ºC (-40ºF to 158ºF)
- EMC Emission: Complies with EN 61000-6-3:2001, CISPR 22:2005, Class B 30MHz–11GHz
- ESD: Complies with EN61000-4-2 (extended) ±8KV (20 contacts) & ±15KV (20 air discharges)
- EMC Immunity: 100V/m, 80MHz-2.7GHz, 1KHz 80% sine wave modulation, EN 61000-4-3 (extended)
- Vibration: 100Hz – 200Hz @ 0.13g /Hz, total 3.6gRMS (1 Hour in each of the three mutually perpendicular axis)
Electrical Specifications:
- Gain (Output Voltage Span): ±10% x V to ±50% x V
- Output at Center: V/2 ±(5% x Gain)
- Power Supply: 5V ±0.5V Transient free (Configs 1, 3, 4 & 5) or 3.3V ±0.1V (Config 2)
- Center Tap Impedance: 1K1
- Center Detect Output: Pulled high within joystick via 2K2 to +V, and smoothed to 0V with 100nF
- Sensor Type: Hall effect
- Analog PWM CAN J1939 & CANopen outputs
- Current Consumption: 5V <13mA (Two axis) <20mA (Three axis) 3.3V <24mA (Two axis) <40mA (Three axis)
- Loads: Minimum 10K, preferred 100K+
Added to Your Cart