3125DBL720
Introducing the 3125DBL720 Joystick, the ultimate tool for precision control. With its sleek design and ergonomic handle, this Joystick offers a comfortable grip for extended use. The Gain feature provides enhanced sensitivity, allowing for precise movements and accurate navigation. The Limiter function ensures that your inputs stay within predefined parameters, preventing any unwanted overshooting. The Diamond Limiter adds an extra layer of durability and stability to withstand intense usage. And with the Circular drop-in Bezel, installation is a breeze. Take control like never before with the 3125DBL720 Joystick.
Key Features
- Gain: 25 XV
- Bezel: Circular Drop-In Mounting
- Limiter: Diamond
- Modifier: Guided Feel
- Configuration: Standard
Specifications
General Specifications:
- Life Cycles: 10,000,000 cycles (5,000,000 for 3 axis joysticks)
- Seal Above Panel: IP66 (dependant on configuration)
Environmental Specifications:
- Operating Temperature: -25ºC to 70ºC (-13ºF to 158ºF)
- Storage Temperature: -40ºC to 70ºC (-40ºF to 158ºF)
- EMC Emission: Complies with EN 61000-6-3:2001, CISPR 22:2005, Class B 30MHz–11GHz
- ESD: Complies with EN61000-4-2 (extended) ±8KV (20 contacts) & ±15KV (20 air discharges)
- EMC Immunity: 100V/m, 80MHz-2.7GHz, 1KHz 80% sine wave modulation, EN 61000-4-3 (extended)
- Vibration: 100Hz – 200Hz @ 0.13g /Hz, total 3.6gRMS (1 Hour in each of the three mutually perpendicular axis)
Electrical Specifications:
- Gain (Output Voltage Span): ±10% x V to ±50% x V
- Output at Center: V/2 ±(5% x Gain)
- Power Supply: 5V ±0.5V Transient free (Configs 1, 3, 4 & 5) or 3.3V ±0.1V (Config 2)
- Center Tap Impedance: 1K1
- Center Detect Output: Pulled high within joystick via 2K2 to +V, and smoothed to 0V with 100nF
- Sensor Type: Hall effect
- Analog PWM CAN J1939 & CANopen outputs
- Current Consumption: 5V <13mA (Two axis) <20mA (Three axis) 3.3V <24mA (Two axis) <40mA (Three axis)
- Loads: Minimum 10K, preferred 100K+
Added to Your Cart