A1PCB0X203A103
A range of 22 mm flush panel mounting push buttons and matching indicators, available latching and momentary with custom engraved screens
Key Features
- Series: A1
- Accessories: Flushmount
- Bezel: Round
- Function: Latching
- Switch block: Double Pole
- Sealing: Unsealed
- Switch type: Pushbutton
- Bulb: filament 6.3 VDC
- Screen option: start
- Illumination: Non-Illuminated
Specifications
General Specifications:
- Operating temperature : -20°C to +55°C
- Solder heat resistance : 350°C for 5 seconds
- Sealing : Panel sealed to IP65, rear of panel IP40
Environmental Specifications:
- Sealing : Panel sealed to IP65, rear of panel IP40
Electrical Specifications:
- Current/voltage rating : 10mA 5VAC min, 6Amp 250VAC, 6Amp 12VDC
- Initial contact resistance : 10mΩ max at 1Amp 4VDC
- Insulation resistance : 50MΩ min
- Dielectric strength : 750V between open contacts, 5KV live to accessible
- Electrical life 50,000 cycles min
- Insulation : Class 2
- Lamp life : LED, 60,000 hours to 75% relative luminosity filament, approx. 5000 hours,neon, approx. 10,000 hour
Materials:
- Screens : Polycarbonate
- Reflector assembly : Polycarbonate
- Operator : PBT
- Nut : ABS
- Camtrack Momentary : PPE
- Camtrack maintained : PPSU
- Switch block 1 & 2 pole : PBT
- Switch block 3 & 4 pole : PEI
Mechanical Specifications:
- Contact gap : >1mm (0.039)
- Mechanical life : Momentary, 1 million cycles, maintained 100,000 cycles
- Lamp : Midget grove T1 3⁄4 filament, neon or LED
- Terminals : Solder/quick connect 2.8mm (0.110)
Added to Your Cart