3ASH9G
Multimec™ 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the travel of the 3A switch is 2 mm. Multimec™ 3A series has an actuator levelled with the switch body.
Specifications
General Specifications:
- Through-hole (TH) or surface mount (SMD)
- 50 mA / 24 VDC
- Single pole/momentary
- 10,000,000 operations lifetime
- Temperature range: -40/+160 °C
- IP67 sealing
- Actuation force: 3.5 N
Environmental Specifications:
- Working temperature: -40/+160 °C
- Storage temperature: -40/+160 °C
- Soldering(TH): IEC 68-2-20
- Soldering (SMD): JEDEC J-STD-020C
- ENVIRONMENTAL ENDURANCE IEC 68-2-3
- Temperature: +40 °C
- Humidity: 93% RH
- Duration: 56 Days
- TEMPERATURE CYCLING IEC 68-2-14
- Temperature limit: -55/+85 °C
- Number of cycles: 200
- Exposure time at each temperature: 10 min
- Recovery time before measurements: 16 hrs
- Sealing IEC 529: IP-67
Electrical Specifications:
- Contact resistance: <30 m Ω - typ. 10 m Ω
- Insulation resistance: >10 M Ω
- Recommended load:- Silver: 0.5 - 50 mA 24 VDC- Gold: 0.5μ - 50 mA 24 VDC
- Contact bounce: <2 mS - typically 0.5 mS
Materials:
- Housing: PPS UL94V0
- Actuator: PPS UL94V0
- Sealing + spring: Silicone rubber
- Contact spring:- Silver: Stainless steel (+ 3μAg)- Gold: Stainless steel (+ 1μAu)
- Fixed contacts:- Silver - SnCu + 2μNI + 3μAg- Gold - SnCu + 2μNI + 1μAu
- Terminals: SnCu + 2μNI + 3μSn100
Mechanical Specifications:
- Standard actuation force: 3.5 N typ
- Max. Actuation force: 100 N for 10 sec
- Key travel: 1 mm
- Lifetime: >10,000,000