BF225A01BK1200
The BF Series Paddle is the very latest generation in high precision contactless controls.

Key Features
- Switching Points: ±12.5 Degrees
- Lever Operation: Spring to Center
- Insert Color: Black
- Configuration: Inverse Dual Outputs
- Paddle: 74 mm (2.91 in) above the panel
- Gain: ±25%xV
Specifications
Distinctive Features:
- Spring or friction control options
- Two lever heights available
- Inserts available in black, red, blue, yellow & green
- Analog or PWM outputs
- Zero below panel depth
General Specifications:
- Storage: -40°C to 70°C (-40°F to 158°F)
- Operating Temperature: -25°C to 70°C (-13°F to 158°F)
- Seal Above Panel: IP67 (Gasket fitted as standard)
Environmental Specifications:
- EMC Emissions: Complies with EN 61000-6-3:2001 CISPR 22:2005 Class B 30MHz - 11GHz
- Life Cycles: 5 million cycles sprung version only. Detents rated to 2 million cycles
- ESD: Complies with EN61000-4-2 (extended) ±8KV (20 contacts) & +/-15KV (20 air discharges)
- EMC Immunity: 100V/m, 80MHz-2.7GHz, 1KHz 80% sine wave modulation, EN 61000-4-3 (extended)
- Vibration: 100Hz - 200Hz @ 0.13g²/Hz, total 3.6gRMS (1 Hour in each of the three mutually perpendicular axis
Electrical Specifications:
- Gain (Output Voltage Span): ±10% x V to ±50% x V
- Output at Center: V/2 ± (5% x Gain)
- Power Supply: 5V ±0.5V Transient free
- Switch Outputs: Open Drain, pulled high within control via 1K5 to 5V, and smoothed to 0V with 100nF
- Sensor Type: Hall effect
- Current Consumption: <20mA
- Loads: Minimum 10K, preferred 100K+
Materials:
- Housing: Polyetherimide, polycarbonate
- Handles: Polyetherimide, polycarbonate
Mechanical Specifications:
- Weight: 50g
- Mechanical Operating Angle: ± 25 Degrees
- Max Load to Mechanism: Vertical: IK08 (BSEN62262:2002) Horizontal: 75N (16.86lbf)