Configurator (22 products)

Actuator

Cap

Illumination

Mounting

Sealing

Function

Product configurator

Tactile Switches

Showing 1 - 22 of 22 items
  • D162 series

    D162 tact switches feature excellent coplanarity and right angle for pick and place. Main featuresSurface mountNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 NTemperature range : -40 °C to + 90 °CTape and reel packagingCase and actuator material : high temperature 4/6 nylon

  • PHAP5-10 Series

    PHAP5-10 Tact switches 3.5 x 6 mm standard package.Main features Compact sizeNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 NTemperature range : -25 °C to + 70 °CAvailable in bag, tube & Tape & reel packagingSurface mount and through-hole mounting

  • PHAP5-30 Series

    PHAP5-30 Tact switches 6 x 6 mm Standard package.Main features Square or Round CapsNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 N or 2.6 NTemperature range : -25 °C to + 70 °CRight angle & vertical PCB mountingAvailable in Bag, tube & Tape & reel packagingSurface mount and through-hole mounting

  • PHAP5-31 Series

    PHAP5-31 Tact switches 6 x 6 mm low profile package.Main features low profileNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 N or 2.6 NTemperature range : -25 °C to + 70 °CAvailable in tube & Tape & reel packagingSurface mount and through-hole mounting

  • PHAP5-50

    PHAP5-50 Tact switches 12 x 12 mm Standard package.Main featuresSquare or Round CapsNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 N or 2.6 NTemperature range : -25 °C to + 70 °CAvailable in Bag, tube & Tape & reel packagingSurface mount and through-hole mounting

  • MJTP Series 12mm through hole

    12 mm square tact switches, through hole Main featuresSPST momentary action Excellent tactile feedback (snap dome) Long operating life for high reliability Molded-in terminals minimizing wicking of flux or solder Flush, round, keyed or square actuator Through hole / surface mounting

  • MJTP series_6mm through hole

    6 mm Square tact switches, through holeMain featuresNumerous single pole / single throw momentary configurationsExcellent tactile feedback (snap dome)Ultra compact sizeLong operating life for high reliabilityMolded-in terminals minimizing wicking of flux or solder

  • MJTP Series_6 & 4mm_surface mount

    6 mm & 4 mm Square tact switches, surface mountMain featuresNumerous single pole / single throw momentary configurationsExcellent tactile feedback (snap dome)Ultra compact sizeLong operating life for high reliabilityMolded-in terminals minimizing wicking of flux or solder

  • Multimec™ 5G

    Multimec™ 5G switch has a large diameter snap-on cap retention system and an actuator levelled with the switch body. The switch series has 3 standard actuation forces and is only available in high temperature material in order to stand today´s advanced soldering processes. Furthermore, the switch can be supplied with one or two LEDs integrated on it in...

  • Multimec™ 3C

    Simplicity and reliability makes the Multimec™ 3C an excellent switch for build-in and over-mould solutions. In addition, the switch is great for overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the overlay and not the PCB, which is very cost-effective.Main featuresh=6.4 mm10 x 10 mmMomentary NOIP67...

  • Multimec™ 3E

    Multimec™ 3E series switches have a hole in the switch body for mounting caps. This switch series is used for mounting Varimec™ caps. There are 2400 options in the Varimec™ range.Caps that can be mounted on Multimec™ 3E: Foilmec™ 1Y/1YA and Varimec™Main featuresh=6.4 mm10 x 10 mmMomentary NOIP67 sealing10,000,000 cyclesSMD, TH or through-hole RAS

  • Multimec™ 3A

    Multimec™ 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the travel of the 3A switch is 2 mm. Multimec™ 3A series has an actuator levelled with the switch body.Caps mounted on Multimec™ 3A: 1A, 1B+2C/2D, 1M, 1ZA and 1ZBMain featuresh=6.4 mm10 x 10 mmMomentary NOIP67 sealing10,000,000 cyclesTH or SMD

  • Multimec™ 3F

    Multimec™ 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. It also has a right angle version with an optional LED.Caps that can be mounted on Multimec™ 3F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1P, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1X and 1ZC. Main featuresh=10.4 mm10 x 10 mmMomentary NOIP67...

  • Multimec™ 5E

    Multimec™ 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body. 5E is only available in high temperature material in order to stand today´s advanced soldering processes.Caps available for 5E are: 1SS, 1PS, 1YS/1YAS and Rockermec™ solution.Main featuresh=6.4 mm10 x 10 mmMomentaryNO or NC/NO (NC/NO...

  • Ultramec™ 6C

    Ultramec™ is a whole new switch line from MEC. 6C is the first switch in the line. Ultramec™ 6C switch is a low profile switch with crisp sound and feel. It has IP67 sealing, 3 million cycles and pins for accurate mounting with the J-bend terminals. The switch is excellent for under overlay and custom caps as well as when space is limited.Caps that can be...

  • Multimec™ 5G

    Multimec™ 5G switch has a large diameter snap-on cap retention system and an actuator levelled with the switch body. The switch series has 3 standard actuation forces and is only available in high temperature material in order to stand today´s advanced soldering processes. Furthermore, the switch can be supplied with one or two LEDs integrated on it in...

  • Multimec™ 3C

    Simplicity and reliability makes the Multimec™ 3C an excellent switch for build-in and over-mould solutions. In addition, the switch is great for overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the overlay and not the PCB, which is very cost-effective.Main featuresh=6.4 mm10 x 10 mmMomentary NOIP67...

  • Multimec™ 3E

    Multimec™ 3E series switches have a hole in the switch body for mounting caps. This switch series is used for mounting Varimec™ caps. There are 2400 options in the Varimec™ range.Caps that can be mounted on Multimec™ 3E: Foilmec™ 1Y/1YA and Varimec™Main featuresh=6.4 mm10 x 10 mmMomentary NOIP67 sealing10,000,000 cyclesSMD, TH or through-hole RAS

  • Multimec™ 3A

    Multimec™ 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the travel of the 3A switch is 2 mm. Multimec™ 3A series has an actuator levelled with the switch body.Caps mounted on Multimec™ 3A: 1A, 1B+2C/2D, 1M, 1ZA and 1ZBMain featuresh=6.4 mm10 x 10 mmMomentary NOIP67 sealing10,000,000 cyclesTH or SMD

  • Multimec™ 3F

    Multimec™ 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. It also has a right angle version with an optional LED.Caps that can be mounted on Multimec™ 3F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1P, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1X and 1ZC. Main featuresh=10.4 mm10 x 10 mmMomentary NOIP67...

  • Multimec™ 5E

    Multimec™ 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body. 5E is only available in high temperature material in order to stand today´s advanced soldering processes.Caps available for 5E are: 1SS, 1PS, 1YS/1YAS and Rockermec™ solution.Main featuresh=6.4 mm10 x 10 mmMomentaryNO or NC/NO (NC/NO...

  • Ultramec™ 6C

    Ultramec™ is a whole new switch line from MEC. 6C is the first switch in the line. Ultramec™ 6C switch is a low profile switch with crisp sound and feel. It has IP67 sealing, 3 million cycles and pins for accurate mounting with the J-bend terminals. The switch is excellent for under overlay and custom caps as well as when space is limited.Caps that can be...

Showing 1 - 22 of 22 items

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!

Callback request