Configurator (121 products)

Actuator

Cap

Illumination

Mounting

Sealing

Function

Product configurator

PCB switches

Showing 121 - 142 of 142 items
  • IZ Series - metal - momentary - PCB

    The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main featuresRear mounting for easier installationMomentary metal...

  • IZ series - metal - latching - PCB

    The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main features Rear mounting for easier installationLatching action metal...

  • Rockermec

    The Rockermec™ solution consists of two Multimec® 5E switches, a sealing that also provides functionality and a new rocker cap called 10A.Rockermec is a compact solution for your high design-in requirements: it has small dimensions, aesthetic design and it is sealed to IP67.Illumination is provided with LEDs on the PCB so you can pick the exact colors you...

  • Single Switch Module

    Single Switch Module is a module for a single Multimec™ switch and cap.Main featuresModule size: 22 x 37 mmStandard switch: Multimec™ 5G Switches mountable: 3A, 3E, 3C, 3F (non-illuminated), 4F, 5E and 5G

  • PHAP5-10 Series

    PHAP5-10 Tact switches 3.5 x 6 mm standard package.Main features Compact sizeNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 NTemperature range : -25 °C to + 70 °CAvailable in bag, tube & Tape & reel packagingSurface mount and through-hole mounting

  • PHAP5-30 Series

    PHAP5-30 Tact switches 6 x 6 mm Standard package.Main features Square or Round CapsNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 N or 2.6 NTemperature range : -25 °C to + 70 °CRight angle & vertical PCB mountingAvailable in Bag, tube & Tape & reel packagingSurface mount and through-hole mounting

  • PHAP5-31 Series

    PHAP5-31 Tact switches 6 x 6 mm low profile package.Main features low profileNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 N or 2.6 NTemperature range : -25 °C to + 70 °CAvailable in tube & Tape & reel packagingSurface mount and through-hole mounting

  • PHAP5-50

    PHAP5-50 Tact switches 12 x 12 mm Standard package.Main featuresSquare or Round CapsNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 N or 2.6 NTemperature range : -25 °C to + 70 °CAvailable in Bag, tube & Tape & reel packagingSurface mount and through-hole mounting

  • S series - PCB

    These washable miniature toggle switches with plain bushing  are specially designed for flow soldering at 260°C during 5 seconds owing to high-temperature polymer parts. Main featuresSecure assembly of the two case partsInternally sealed bushingEpoxy sealed terminalsProcess compatible: Wave solderable and washableOptional ESD protectionA cap U3012...

  • SF series - PCB

    These washable miniature toggle switches with insulated threaded bushing are especially designed for flow soldering at 260 °C during 5 seconds owing to high temperature polymer parts. Main features :Insulated threaded bushingProcess sealedFront and rear sealingOptional ESD protection A cap U3012 provide additional protection during PCB processing,...

  • MJTP Series 12mm through hole

    12 mm square tact switches, through holeMain featuresSPST momentary actionExcellent tactile feedback (snap dome)Long operating life for high reliabilityMolded-in terminals minimizing wicking of flux or solderFlush, round, keyed or square actuatorThrough hole / surface mounting

  • MJTP series_6mm through hole

    6 mm Square tact switches, through holeMain featuresNumerous single pole / single throw momentary configurationsExcellent tactile feedback (snap dome)Ultra compact sizeLong operating life for high reliabilityMolded-in terminals minimizing wicking of flux or solder

  • MJTP Series_6 & 4mm_surface mount

    6 mm & 4 mm Square tact switches, surface mountMain featuresNumerous single pole / single throw momentary configurationsExcellent tactile feedback (snap dome)Ultra compact sizeLong operating life for high reliabilityMolded-in terminals minimizing wicking of flux or solder

  • Foilmec™ 1YAS

    1YAS keycap offers a Ø2.8mm round indicator located in the corner of the keycap for easy status readout. This indicator light will function independently from the completely illuminated background, giving a full illumination of text or symbol printed on the overlay and ensuring a secure operation at night or under difficult visual conditions.1YAS keycap...

  • MS series microminiature slide switch

    Microminiature slide switchesMain featuresUltra compact sizeLow profileMolded-in sealed terminalsWashing not recommendedStainless steel cover

  • MHSS series

    Microminiature slide switchesMain featuresWashing not recommendedBifurcated wiping contact designLow profile Epoxy sealed terminalsExcellent tactile feedback (detent action)Molded in terminals minimize flux or solder entryUltra compact case size

  • MMS Series

    Microminiature slide switchesMain featuresBifurcated wiping contact designLow profileEpoxy sealed terminalsUltra compact sizeWashing not recommended

  • MHS Series

    Miniature slide switchesMain featuresMiniature compact sizeWash-through open fram constructionPositive spring loaded ball detent mechanismEpoxy sealed terminalsSolvent washing permittedSnap-in PC mounting bracket designGold plated contacts available (contact factory)

  • 10C

    A slightly concave round cap that consists of two parts - top part that goes through panel and bottom part that is a diffuser. The two part design helps to provide excellent illumination. 10C cap series is mounted on Multimec™ 5G series. Main featuresØ19.2 mmStandard cap colors: blue, grey, red, black, signal white and frosted white

  • 2SS extender

    2SS is an extender for Multimec™ 5G series switches and caps.Main featuresH=5-10 mmStandard color: black

  • Vario support

    Vario support is a mounting system for Unimec™ switches and accessories. The support lets you mount several switches at once and ensures that they are aligned.Vario support is mounted to the back of the panel with bolts. In case of just a few switches PCB is unnecessary, wires can be soldered right to the switch terminals.Main featuresStandard sizes: 1x1...

  • MS Series

    Microminiature slide switchesMain featuresUltra compact size Low profileMolded-in sealed terminalsWashing not recommendedStainless steel cover

Showing 121 - 142 of 142 items

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Ask our experts via live chat!

Callback request