Configurator (128 products)

Actuator

Cap

Illumination

Mounting

Sealing

Function

Product configurator

PCB switches

Showing 97 - 120 of 149 items
  • NDA Series

    The standard right-angle profile NDA DIP switch is designed for reliable operation with positive detent action. Available 2 to 12 poles, through hole mounting. Main features2 to 12 waySpray washable with tape sealSelf-cleaning wiping contactsGold plated terminals

  • NDP Series

    The standard profile NDP DIP switch is designed for reliable operation with positive detent action. Available 2 to 12 poles, through hole mounting.Main features2 to 12 waySpray washable with tape sealSelf-cleaning wiping contactsGold plated terminals

  • P36 Series

    Sub-miniature Surface Mount Rotary Code SwitchMain features3 actuator typesSmall foot printHigh reliabilitySolder & flux sealed, washable

  • P25 Series

    Sub-miniature Surface Mount Rotary Code Switch.Main features2.5 mm high off the PCBLateral C-contactSMJ & SMT

  • PT65 Series

    Miniature Through Board Rotary Code SwitchMain features4 actuator typesCompact DesignHigh reliability Solder and flux sealed, washable

  • DH1 Series

    Right or left Angle PCB mounting thumb wheel switch.Main featuresDiameter 13 mmWidth 16 mm SMT Gull Wing10 Position BCD

  • P65 Series

    Miniature Through Board & Surface Mount Rotary Code SwitchMain featuresDesigned for higher temperature applicationsSolid PCB pinsHigh reliabilityAbrasion resistant gold-plated contacts

  • IKC Series

    The very low profile IKC J-bend half pitch DIP switch is designed for reliable operation with an extremely small PCB space requirement. Process compatible (withstand IR reflow soldering) and washable (tape seal standard).Main features1,27 mm (.050) terminal to terminal pitchOverall height from PCB : 1,7 mm (.067)Very small PCB space requirementProcess...

  • SP series - PCB

    Single and double pole momentary pushbutton switches with silver or gold plated contacts. Panel or PC mount, rated up to 1 amp, UL models available. Main featuresSealed : Secure assembly of the two case parts, Internally sealed bushing, Epoxy sealed terminals Process compatible (plain bushing models) : Wave solderable,  Washable

  • 9100-9200-9500 series - PCB

    Normally open or normally closed models with solder lug, straight PC or right angle PC terminals. Gold plated brass contacts, front panel sealing option available. Main featuresPanel and PC mount models, horizontal or vertical Self-cleaning and butt action contacts Several plunger options

  • IZ series - plastic - latching - PCB

    The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main features Rear mounting for easier installationLatching action...

  • IZ series - plastic - momentary - PCB

    The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main features Rear mounting for easier installationMomentary modelsScrew...

  • IZ Series - metal - momentary - PCB

    The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main featuresRear mounting for easier installationMomentary metal...

  • IZ series - metal - latching - PCB

    The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main features Rear mounting for easier installationLatching action metal...

  • Single Switch Module

    Single Switch Module is a module for a single Multimec™ switch and cap.Main featuresModule size: 22 x 37 mmStandard switch: Multimec™ 5G Switches mountable: 3A, 3E, 3C, 3F (non-illuminated), 4F, 5E and 5G

  • PHAP5-10 Series

    PHAP5-10 Tact switches 3.5 x 6 mm standard package.Main features Compact sizeNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 NTemperature range : -25 °C to + 70 °CAvailable in bag, tube & Tape & reel packagingSurface mount and through-hole mounting

  • PHAP5-30 Series

    PHAP5-30 Tact switches 6 x 6 mm Standard package.Main features Square or Round CapsNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 N or 2.6 NTemperature range : -25 °C to + 70 °CRight angle & vertical PCB mountingAvailable in Bag, tube & Tape & reel packagingSurface mount and through-hole mounting

  • PHAP5-31 Series

    PHAP5-31 Tact switches 6 x 6 mm low profile package.Main features low profileNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 N or 2.6 NTemperature range : -25 °C to + 70 °CAvailable in tube & Tape & reel packagingSurface mount and through-hole mounting

  • PHAP5-50

    PHAP5-50 Tact switches 12 x 12 mm Standard package.Main featuresSquare or Round CapsNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 N or 2.6 NTemperature range : -25 °C to + 70 °CAvailable in Bag, tube & Tape & reel packagingSurface mount and through-hole mounting

  • S series - PCB

    These washable miniature toggle switches with plain bushing  are specially designed for flow soldering at 260°C during 5 seconds owing to high-temperature polymer parts. Main featuresSecure assembly of the two case partsInternally sealed bushingEpoxy sealed terminalsProcess compatible: Wave solderable and washableOptional ESD protectionA cap U3012...

  • SF series - PCB

    These washable miniature toggle switches with insulated threaded bushing are especially designed for flow soldering at 260 °C during 5 seconds owing to high temperature polymer parts. Main features :Insulated threaded bushingProcess sealedFront and rear sealingOptional ESD protection A cap U3012 provide additional protection during PCB processing,...

  • MJTP Series 12mm through hole

    12 mm square tact switches, through hole Main featuresSPST momentary action Excellent tactile feedback (snap dome) Long operating life for high reliability Molded-in terminals minimizing wicking of flux or solder Flush, round, keyed or square actuator Through hole / surface mounting

  • MJTP series_6mm through hole

    6 mm Square tact switches, through holeMain featuresNumerous single pole / single throw momentary configurationsExcellent tactile feedback (snap dome)Ultra compact sizeLong operating life for high reliabilityMolded-in terminals minimizing wicking of flux or solder

  • MJTP Series_6 & 4mm_surface mount

    6 mm & 4 mm Square tact switches, surface mountMain featuresNumerous single pole / single throw momentary configurationsExcellent tactile feedback (snap dome)Ultra compact sizeLong operating life for high reliabilityMolded-in terminals minimizing wicking of flux or solder

Showing 97 - 120 of 149 items

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!

Callback request