Main catalog

Showing 49 - 72 of 346 items

EU2B series - E-stops
Ideal for applications in hazardous locations with explosive gases, such as oil & gas, petrochemical, painting and more. Main features Hazardous location qualified and certified : Zone 1/Zone 21, division 2Applicable in explosive gas atmospheres (Ex de IIC T6 Gb),Applicable in explosive dust atmospheres (Ex tb IIIC Db IP65),Two ways of...
More
11000 series
These switches are specially manufactured for defence and telecommunications applications.Main features Approvals : CECC 96201-005 and CECC 96201-008Robust switches for high specification environmentsToggle action on 2-position models giving smooth mechanical operationPlastic material with high insulation resistanceSeveral front panel sealing...
More
QRM14 Series
The QRM14 Series is a range of 14mm diameter indicators which are rear mounted, epoxy sealed and designed to be offered to the back of the panel for assembly.They are available in bi-colored and tri-colored LEDs.Main features IP67 sealed to EN60529 Rear end epoxy sealed Black finish or anodized aluminumTypical ApplicationsControl panelsRemote...
More
IZ series - metal - latching
The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main features Rear mounting for easier installationLatching action metal...
More
1000 Series
The 1000 Series is a versatile range of low-cost switch joysticks, ideal for light to medium duty environments where proportional control is not a necessity. Configurable with either single or double pole switching, the 1000 Series can also be specified as screw or bush mounted. There are two construction options, based on the use of either V3 or V4...
More
PZ series
With a 10 million lifecycle due to movement free activation, the PZ series, a piezoelectric keypad is intended for applications requiring high reliability. Due to its closed surface, the PZ series keypad is sealed up to IP68, preventing the ingress of liquids and other contaminants. It can be installed on a washable surface and is ideally...
More
IT series
Printed circuit mount, latch down mechanism pushbuttons with highest dielectric 6 KV rating and long life cycles. Double pole configuration, case and cover is polyester UL-VO. 8 mm total plunger travel.Main features Mains pushbutton switches for PC boards Highest dielectric 6 KVLatchdown mechanism
More
Q16 Series
Panel mount LED indicators with 10 mm colored diffused epoxy lens or 10 mm water clear super bright LED’s with fixed light, flashing and RGB options. Main features Metal bezel finish: bright chrome, black or satin grey. Prominent, flush and recessed bezel styles. Voltage: 2 VDC - 220 VAC. Terminals: 2.8 x 0.8 solder lug/fastons, pins...
More
IZ series - plastic - momentary
The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main features Rear mounting for easier installationMomentary modelsScrew...
More
1000HE series
The 1000HE series is a switch based joystick that is designed to work in harsh environments and applications. Typical applications include truck lift gates and electric vehicle controls. 1000HE Series joystick configuration delivers a product with two sealing boots as standard (an inner and an outer) for a double seal for such harsh environments.Main...
More
Piezoelectric keypads
APEM piezoelectric keypads combine pressure-sensitive keys and visually attractive design. Offering the highest level of sealing against water and dust, these keypads have no electrical consumption at rest and require a real touch to be activated. Smooth aluminum front face for a modern design Easy to clean Protected against water, dust...
More
7000 series - PCB
1 and 2 poles, panel and pc mount in numerous configurations. Silver or gold plated contacts, ratings up to 6 amps.Main features :Wide variety of actuators Many mounting styles for panel or PCBVDE, UL and CSA approved
More
Q19 Series
Panel mount LED indicator 10 mm colored diffused epoxy lens or 10 mm water clear super bright LED’s with fixed light, flashing and RGB options. Main features Bright chrome, black and satin grey bezel finish. Prominent, flush, recess & extra prominent bezel styles. Voltage: 2 VDC - 220 VAC. Terminals: 2.8 x 0.8 solder lug/faston, pins...
More
IZ series - plastic - latching
The IZ series is a rear mounted pushbutton, available with a polyamide or a metal case. This product has been designed to reduce the assembly cost in 2 application types: wave soldering and when using a connector. The IZ series allows flush panel mounting and makes dismounting easier.Main features Rear mounting for easier installationLatching action...
More
8000 Series
The 8000 Series is a family of rugged switch joysticks. Based on the proven mechanics of the 9000 Series, the 8000 Series utilizes high-quality microswitches to provide a range of possible outputs, including the option of progressive switching on a single axis for dual speed control.Main featuresOne or two axisOptional center detect microswitchWide...
More
Rubber keypads
APEM develops and produces rubber keypads. This technology has the following advantages: Custom ergonomics with low investment cost Dedicated custom electronics on product PCB Possible mix of shapes, colors and key dimensions on the same product APPLICATIONSAPEM supplies rubber keypads for diversified applications such as:...
More
AS series - PCB
Single pole rocker switches in numerous electrical configurations. Black case, a variety of actuator colors, solder lug or straight pc terminals, silver or gold plated terminals. Ratings up to 4 amps.Main features :Double insulationEpoxy sealed terminalsUL and CSA approved
More
Q22 Series
Panel mount LED indicators with 18 mm colored diffused epoxy lens with fixed light, flashing and RGB options. Main features Bezel finish: bright chrome, satin grey, black or gold, stainless steel and aluminium. Prominent, flush, recessed and chamfer bezel styles. Voltage: 5.5 VDC - 220 VAC. Terminals: 2.8 x 0.8 solder lug/fastons, pins...
More
IA series
The IA series actuator consists of a polyurethane membrane which depresses when the switch is actuated. The membrane is press fitted onto the bushing, providing an IP67 front of panel seal and ensuring high resistance to frost and external contaminants. The actuator material provides a soft feel and allows easy operation even with gloved hands. The low...
More
9000 Series
The 9000 Series is ideal for those applications that demand proportional control with the lowest possible profile below the panel. This joystick offers self-centering, omni-directional functionality, and utilizes the exclusive ‘locking cam’ system to rigidly secure the highly repeatable mechanism around the precision ground steel operating shaft....
More
Ruggedized control systems for harsh...
For many years, APEM has been developing ruggedized control systems for very harsh environments. These products combine critical electronic and software design expertise along with our core knowledge of milling, printing and discrete switch integration. They can integrate switches and switch guards. Typically, they are custom products suitable for small...
More
FM series - PCB
Single pole rocker switches, illuminated or non-illuminated with solder lug, quick connect or pc terminals. Rated up to 10 amps. Numerous actuator colors. Main features : For class II appliancesVDE and UL approvedProtection against moisture by double-shell case : When the switch is submitted to moisture (drops, condensation), the double-shell case...
More
QS Series
Snap in panel mount LED indicators with colored diffused flat lens, for typical replacement of filament and neon indicators.Main features Ø6 mm, 8 mm, 10 mm and 12 mm cut-out sizes Front panel snap-in mounting requires no additional hardware Coloured diffused flat lenses Available colors: Red, Green, Yellow, Blue, Orange, White (clear)...
More
IF series
The IF series actuator consists of a polyamide membrane which depresses when the switch is actuated. The membrane is press fitted onto the bushing. This technology prevents the ingress of liquid or dust into the product. The IF series pushbutton switches are intended for equipment exposed to bad weather, and most notably to frost. They are also suitable...
More