Product configurator

Main catalog

Showing 361 - 384 of 425 items
  • MJTP Series 12mm through hole

    12 mm square tact switches, through holeMain featuresSPST momentary action Excellent tactile feedback (snap dome) Long operating life for high reliability Molded-in terminals minimizing wicking of flux or solder Flush, round, keyed or square actuator Through hole / surface mounting

  • Switch guards for switch series 3500 -...

    Switch guards prevent any inadvertent lever operation. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded bushing and lever length 17,5 (.688) outside bushing. Main features : Models...

  • MJTP series_6mm through hole

    6 mm Square tact switches, through holeMain featuresNumerous single pole / single throw momentary configurationsExcellent tactile feedback (snap dome)Ultra compact sizeLong operating life for high reliabilityMolded-in terminals minimizing wicking of flux or solder

  • CSG series

    The CSG series is a new range of thermoplastic switch guards. Light, practical and modern, they feature anti-tamper wire seal hole as standard. They are intended for use on our 5000M and 600H toggle switches. Main features : Patented design, easier grip even with glovesSide protection avoiding inadvertent actuationNo distortion or break in case of...

  • MJTP Series_6 & 4mm_surface mount

    6 mm & 4 mm Square tact switches, surface mountMain featuresNumerous single pole / single throw momentary configurationsExcellent tactile feedback (snap dome)Ultra compact sizeLong operating life for high reliabilityMolded-in terminals minimizing wicking of flux or solder

  • MSG series

    The MSG series is a new range of switch guards combining modern design and robustness, specially dedicated to harsh environments. They are intended for use on our 12000, 3500, 600H and 6000 toggle switches. Main features :APEM patented design Avoid inadvertent operationNo distortion or break in case of crushingResistant to hydrocarbons, acids, saline...

  • 9400-9600 series

    Momentary pushbutton switches. Normally open, normally closed or combined function. Solder lug, PC or quick connect terminals available with gold plated or silver contacts. Front panel option seal available. Main featuresTwo case lengths Three electrical functions Sealing options Model X1146 with dia.16 mm (.630) bushing

  • MS series microminiature slide switch

    Microminiature slide switchesMain featuresUltra compact sizeLow profileMolded-in sealed terminalsWashing not recommendedStainless steel cover

  • MHSS series

    Microminiature slide switchesMain featuresWashing not recommendedBifurcated wiping contact designLow profile Epoxy sealed terminalsExcellent tactile feedback (detent action)Molded in terminals minimize flux or solder entryUltra compact case size

  • Sealing boots

    Sealing boots prevent dust, sand and water from getting into switches. On toggle versions, they also prevent ice from blocking lever action. They are compatible with frontal sealing options K and X408. Main featuresSealing boots for toogle, pushbutton or rocker switchesAvailable in a wide range of colours. A sealing ring or washer is standard supplied...

  • MMS Series

    Microminiature slide switchesMain featuresBifurcated wiping contact designLow profileEpoxy sealed terminalsUltra compact sizeWashing not recommended

  • Hardware

    Mounting hardware for switches : knurled and hex nuts, locking rings, lockwashers, cap nuts, dress nuts, ground connectors and sealing washers. Standard hardware is supplied with the switches, other hardware is to order separately. 

  • 1000 series

    The 1000 series toggle switches are single pole configurations and available with solder lug, quick-connect or screw terminals.Main features Optional insulated lever (X213 and X490)Sealing boots2 to 6 ampsCoin silver or silver plated copper terminals

  • MHS Series

    Miniature slide switchesMain featuresMiniature compact sizeWash-through open fram constructionPositive spring loaded ball detent mechanismEpoxy sealed terminalsSolvent washing permittedSnap-in PC mounting bracket designGold plated contacts available (contact factory)

  • MDB1 Series

    Micro switches, also known as snap action switches, are primarily used as limit switches, but are also suitable for many other industry applications.Main featuresLeaf spring mechanism Design in accordance with DIN 41635 Electrical life : 100,000 cycles min. precise switching position Approvals: UL approved materialsTypical...

  • 10C

    A slightly concave round cap that consists of two parts - top part that goes through panel and bottom part that is a diffuser. The two part design helps to provide excellent illumination.  10C cap series is mounted on Multimec™ 5G series.Main featuresØ19.2 mm Standard cap colors: blue, grey, red, black, signal white and frosted white

  • MBZ1 Series

    Micro switches, also known as snap action switches, are primarily used as limit switches, but are also suitable for many other industry applications.Main featuresTension spring mechanism Design in accordance with DIN 41635 Electrical life : 10,000 cycles min. Optional version 100mA 12VDC with Au plated contacts Approvals: UL approved;...

  • 2SS extender

    2SS is an extender for Multimec™ 5G series switches and caps.Main featuresH=5-10 mmStandard color: black

  • MBB1 Series

    Micro switches, also known as snap action switches, are primarily used as limit switches, but are also suitable for many other industry applications. Main featuresLeaf spring mechanism Design in accordance with DIN 41635 Electrical life : 10,000 cycles min. Option version 100mA 12VDC with Au plated contacts on request Approvals:...

  • Vario support

    Vario support is a mounting system for Unimec™ switches and accessories. The support lets you mount several switches at once and ensures that they are aligned.Vario support is mounted to the back of the panel with bolts. In case of just a few switches PCB is unnecessary, wires can be soldered right to the switch terminals.Main featuresStandard sizes: 1x1...

  • MAB1 Series

    Micro switches, also known as snap action switches, are primarily used as limit switches, but are also suitable for many other industry applications.Main featuresLeaf spring mechanism Design in accordance with DIN 41635 Electrical life : 50,000 cycles min. Special version with 3.5N meets glow wire tests for house appliance...

  • SH6 Series

    BCD Hex Code Output Miniature Dual Pushbutton codeMain features BCD Code 10 Digit height 3.1mmHex Code 16 Digit height 2.4mmAbrasion resistant hard gold plating100% Final inspectionBlack bodyFlush mounting optionTypical ApplicationsMedicalTelecommunicationsAddress settingComputer systemsSecurity codeTelemetry setting

  • MS Series

    Microminiature slide switchesMain featuresUltra compact size Low profileMolded-in sealed terminalsWashing not recommendedStainless steel cover

  • PICO-D Series

    BCD Hex Code Output Miniature Dual Pushbutton codeMain features BCD Code 10 Digit height 3.1mmHex Code 16 Digit height 2.4mmAbrasion resistant hard gold plating100% Final inspectionBlack body100,000 Mechanical stepsTypical ApplicationsMedicalTelecommunicationsAddress settingComputer systemsSecurity codeTelemetry setting

Showing 361 - 384 of 425 items

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!

Callback request