AV190003A900
Introducing the AV190003A900 Panel Switch, the perfect solution for all your pushbutton needs. With its sleek design and durable construction, this switch is built to last. Whether you're looking to control lights, appliances, or any other electrical device, our Panel Switch has got you covered. Featuring easy-to-use terminals, installation is a breeze. Simply screw in the wires and you're good to go. Say goodbye to complicated wiring and hello to convenience with the AV190003A900 Panel Switch.
Key Features
- Electrical Functions: Normally Open (NO)
- Bushing Actuator Configurations: Curved Actuator
- Bushing Actuator Materials: Nickel-Plated Brass
- Contact Materials: Silver
- Case: Long
- Sealing: Unsealed
- Terminals: Screw
Specifications
Distinctive Features:
- Momentary NC/NO
- Long life
- Sealed to IP65 and IP69K
General Specifications:
- Torque : 1.5 Nm min.- 4 Nm max. applied to nut
- Panel thickness : 1 (.039) to 11 mm (.433) max.
- Low level or mechanical life : 1,000,000 cycles
- Hand soldering : 300 °C, 3 sec. max.
- Panel cut-out : Ø 19.2 mm (.755) or Ø 22.2 mm (.874)
- Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) (AV9P & AV9B : 25 mm x 25 mm)
Environmental Specifications:
- Operating temperature : -30 °C to +70 °C
Electrical Specifications:
- Max. current/voltage rating with resistive load :- A contacts : 4 A 12 VDC, 500,000 cycles- C contacts : 2 A 48 VDC, 10,000 cycles
- Approved ratings of models with long case and A contacts (AV..000) :UL-CSA : 4 A 250 VAC - 8 A 125 VAC - 6,000 cycles
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 2,000 Vrms 50 Hz min. between terminals and frame2,000 Vrms 50 Hz min. between terminals
Added to Your Cart