AV9SLD2482011K
The AV9SLD2482011K Panel Switch is the perfect solution for all your pushbutton switch needs. With its gold plated dome contacts, you can expect reliable and precise performance every time. Made with high-quality stainless steel bushing materials, this switch is built to last and withstand even the toughest conditions.
Key Features
- Led Colour: Red/Green
- Mounting: Solder
- Bushing Diameters: 19mm (0.748in)
- Bushing Materials: Stainless Steel
- Contact Materials: Gold-Plated
- Illumination: Illuminated
- Overmolding Colors: Translucent
- Sealing: IP67 or IP69K
Specifications
Distinctive Features:
- Mains switches approved to EN61058-1
- Ø 16 (.629), 19 (.748) and 22 mm (.866)
- Latching
- Three terminal types
General Specifications:
- Travel : 0.7 mm (.027) ±0.1 mm (.003)
- Operating force : 7 N ±-2 N
- Torque : 5 Nm min.- 14 Nm max. applied to nut
- Panel thickness : 1 (.039) to 6 mm (.236) max.
- Panel cut-out : Ø 19.2 mm (.755) or Ø 22.2 mm (.874)
- Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181)
Environmental Specifications:
- Operating temperature : -30 °C to +70 °C
- Front panel sealing : IP67 or IP69K according to IEC 60529
Electrical Specifications:
- Max. current/voltage rating with resistive load : 50 mA 24 VDC
- LED voltage and consumption : 2-colour LED : 2 V (3 V max.) 20 mAOther colours : 2 V (3 V max.) 10 mAA resistor must be series-connected by the user **
- Initial contact resistance : 100 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 500 Vrms 50 Hz min. between terminals2,000 Vrms 50 Hz min. between terminals and frame
- Electrical life : 1,000,000 cycles at full load
Added to Your Cart