AV091L3EA240
The AV091L3EA240 Panel Switch, part of the Pushbutton Switches category, features a flat actuator design. Its function is set to ON ON, providing reliable and efficient operation. With silver contacts, this switch ensures optimal conductivity and durability. The solder terminals make it easy to connect and integrate into your electronic projects.
Key Features
- Actuator Type: flat
- Led Colour: Green
- Bushing Actuator Configurations: 1
- Bushing Actuator Materials: Stainless steel stainless steel
- Contacts: Silver
- Function: ON ON
- Illumination: Illuminated
- Sealing: No sealing
- Terminals: Solder
Specifications
Distinctive Features:
- Latching
- Illuminated or non-illuminated
- Three terminal types
General Specifications:
- Torque : 1.5 Nm min.- 4 Nm max. applied to nut
- Panel thickness : 1 (.039) to 9 mm (.354) max.
- Low level or mechanical life : 1,000,000 cycle
- Hand soldering : 300 °C, 4 seconds max.
- Panel cut-out : Ø 19,2 mm (.755) or Ø 22,2 mm (.874)
- Min. pitch for matrix mounting : 30 mm x 30 mm (1.181 x 1.181)
Environmental Specifications:
- Optional front panel sealing : IP65
- Operating temperature : -30 °C to +70 °C (-22 °F to +158 °F)
Electrical Specifications:
- Max. current/voltage rating with resistive load : 2A 48 VDC
- LED voltage and consumption : blue 3.2 V 20 mA, green : 2.1 V 20 mAyellow : 2 V 20 mA, red : 1.95 V 20 mA (a resistor must be series-connected by the user)
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 1,000 Vrms 50 Hz min. between terminals500 Vrms 50 Hz min. between terminals and frame
- Electrical life : 500,000 cycles at 2 A 48 VDC
Added to Your Cart