BD150SD4GR0000
The BD150SD4GR0000 Joystick, also known as the Paddle, is a versatile control device designed for various applications. With a height of 50 mm (1.97 in) above the panel, it offers comfortable and precise control. The Gain feature, adjustable up to 50 xV, allows users to customize the sensitivity to their preference. Additionally, the Joystick comes with a stylish green Insert Color, adding a touch of personality to any setup.
Key Features
- Gain: 50 XV
- Paddle: 50 mm (1,97in) Above the Panel
- Configuration: Standard Dual Outputs
- Lever Operation: Spring to Centre with D4
- Switching Points: No Switches
- Insert Colour: Green
Specifications
Distinctive Features:
- Spring or friction control options
- Two lever heights available
- Inserts available in black, red, blue, yellow & green
- Analog or PWM outputs
- Zero below panel depth
General Specifications:
- Storage: -40°C to 70°C (-40°F to 158°F)
- Operating Temperature: -25°C to 70°C (-13°F to 158°F)
- Seal Above Panel: IP67 (Gasket fitted as standard)
Environmental Specifications:
- EMC Emissions: Complies with EN 61000-6-3:2001 CISPR 22:2005 Class B 30MHz - 11GHz
- Life Cycles: 5 million cycles sprung version only. Detents rated to 2 million cycles
- ESD: Complies with EN61000-4-2 (extended)±8KV (20 contacts) & +/-15KV (20 air discharges)
- EMC Immunity: 100V/m, 80MHz-2.7GHz, 1KHz 80% sine wave modulation, EN 61000-4-3 (extended)
- Vibration: 100Hz - 200Hz @ 0.13g²/Hz, total 3.6gRMS(1 Hour in each of the three mutually perpendicular axis
Electrical Specifications:
- Gain (Output Voltage Span): ±10% x V to ±50% x V
- Output at Center: V/2 ± (5% x Gain)
- Power Supply: 5V ±0.5V Transient free
- Switch Outputs: Open Drain, pulled high within control via 1K5 to 5V, and smoothed to 0V with 100nF
- Sensor Type: Hall effect
- Current Consumption: <20mA
- Loads: Minimum 10K, preferred 100K+
Added to Your Cart