3140RE620
Introducing the 3140RE620 Joystick, a versatile control device that combines precision and comfort to enhance your gaming experience. With its sleek and ergonomic design, this joystick is built to deliver optimal performance. The Gain feature allows you to fine-tune your control settings, giving you the advantage in any game. The Limiter function ensures smooth and precise movements, preventing oversteering or overshooting. The comfortable Handle offers a firm grip, allowing for hours of gameplay without any discomfort. The Bezel, with its square drop-in design, seamlessly integrates into your gaming setup, adding a touch of style. Upgrade your gaming experience with the 3140RE620 Joystick and take control like never before.
Key Features
- Handle: Conical
- Handle: E
- Modifier: Guided Feel
- Bezel: Square (drop-in)
- Gain: ±40%xV
- Limiter: Round
- Series: 3
- Configuration: Standard
Specifications
Distinctive Features:
- One, two or three axis
- Analog or PWM outputs
- Low profile less than 20 mm below panel depth
- 5 V or 3.3 V operation
- Metal mechanism
General Specifications:
- Life Cycles: 10,000,000 cycles (5,000,000 for 3 axis joysticks)
- Seal Above Panel: IP66 (dependant on configuration)
Environmental Specifications:
- Operating Temperature: -25ºC to 70ºC (-13ºF to 158ºF)
- Storage Temperature: -40ºC to 70ºC (-40ºF to 158ºF)
- EMC Emission: Complies with EN 61000-6-3:2001, CISPR 22:2005, Class B 30MHz–11GHz
- ESD: Complies with EN61000-4-2 (extended) ±8KV (20 contacts) & ±15KV (20 air discharges)
- EMC Immunity: 100V/m, 80MHz-2.7GHz, 1KHz 80% sine wave modulation, EN 61000-4-3 (extended)
- Vibration: 100Hz – 200Hz @ 0.13g /Hz, total 3.6gRMS (1 Hour in each of the three mutually perpendicular axis)
Electrical Specifications:
- Gain (Output Voltage Span): ±10% x V to ±50% x V
- Output at Center: V/2 ±(5% x Gain)
- Power Supply: 5V ±0.5V Transient free (Configs 1, 3, 4 & 5) or 3.3V ±0.1V (Config 2)
- Center Tap Impedance: 1K1
- Center Detect Output: Pulled high within joystick via 2K2 to +V, and smoothed to 0V with 100nF
- Sensor Type: Hall effect
- Analog PWM CAN J1939 & CANopen outputs
- Current Consumption: 5V <13mA (Two axis) <20mA (Three axis) 3.3V <24mA (Two axis) <40mA (Three axis)
- Loads: Minimum 10K, preferred 100K+
Added to Your Cart