FDBP1F1482F14
FD series, double icon illuminated pushbutton switches, the combination of attractive design & robustness.
Key Features
- Led Control And No Of Poles: LED linked to actuator, green if switch in ON position, single pole
- Bezel Color: Black
- Series: FD
- Symbols: ON (green) / OFF (red) with ring
- Actuator: Round, flat
- Led Resistors: 12 V resistor
- Contact Mat: Silver, gold plated
- Actuator Color: Smoke black
- Led Color: Red/green
- Terminals: Solder lugs
- Electrical Functions: OFF - ON
- Models: Snap-in, Ø 26 (1.016)
Specifications
Distinctive Features:
- Double icon actuator
- Snap-in and threaded bushing models
- Large but lightweight
- Sealed to IP69K (threaded bushing version)
General Specifications:
- Panel thickness : - Snap-in version : 1.5 (.059) to 2 mm (.078) with panel gasket 2 (.078) to 2.5 mm (.885) without panel gasket - Threaded bushing version :1(.039) to 18 mm (.708) max.
- Total travel : 2.5 mm ± 0.5 mm
- Typical operating force : 8 N ± 2 N
- Low level or mechanical life : - Momentary models : 1 million cycles - Latching models : 200,000 cycles
- Torque : 3 Nm max. applied to nut
Environmental Specifications:
- Front panel sealing : - Threaded bushing version : IP69K according to DIN 40050-9 - Snap-in version : IP54 according to IEC 60529 with panel gasket and 2 mm panel thickness
- Operating temperature : -40 °C to +75 °C
Electrical Specifications:
- Max. current/voltage rating with resistive load : - silver contacts (code 2) : 4 A 12 VDC - gold plated contacts (code 4) : 200 mA 12 VDC
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1 GΩ min. at 500 VDC
- Dielectric strength : 1,000 Vrms 50 Hz min.
- Electrical life at full load : - Momentary models : 1 million cycles (gold plated contacts), 400,000 cycles (silver contacts) - Latching models : 200,000 cycles
Materials:
- Case : PA46
- Actuator : PA12
- Bushing/ bezel : PA66
- Contacts : silver (code 2) or silver, gold plated (code 4)