ICR3SAD1
The IC series is a range of momentary pushbutton switches for harsh environments with short case for reduced behind-panel depth.
Key Features
- Series: IC
- Contacts: Silver, gold plated
- Terminals: Solder lugs
- Actuator Colors: Blue
- Actuator Shapes: Round, curved
- Electrical Function: Normally open (NO)
Specifications
Distinctive Features:
- Momentary with short case, reduced behind-panel depth
- Tactile feedback
- Flat round actuator for optional marking
- Glossy actuator option (round curved only)
- Sealed to IP67
General Specifications:
- Panel thickness: 1.5 mm (.059) min. 4 mm (.157 max.)
- Total travel: 1.7 mm (.067)+/- 0.3 mm
- Typical operating force: 4 N +/- 2 N
- Low level or mechanical life: 1,000,000 cycles
- Torque: 1,5 Nm max. applied to nut
- Soldering: 320 °C max. for 3 sec
Environmental Specifications:
- Front panel sealing: IP67 according to IEC 60529
- Shock resistance: 100 g according to IEC 512-4, test 6c
- Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
- Salt spray: IEC 512-6, test 11f
- Robustness: IK06 according to EN 50102 (1 joule)
- Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)
Electrical Specifications:
- Max. current/voltage rating with resistive load: 5 A 28 VDC, 70,000 cycles, 0.2 A 48 VDC, 500,000 cycles, 0.5 A 48 VAC, 500,000 cycles
- Initial contact resistance: 50 mΩ max.
- Insulation resistance: 1 GΩ min. at 500 VDC
- Dielectric strength: 1,500 Vrms 50 HZ between terminals
Materials:
- Case : thermoplastic UL94-V0
- Actuator : polyamide 6/6
- Bushing/bezel : zinc die-cast (zamac), black painted
- Contacts : silver, gold plated
- Multi-wire leads AWG20, section 0.6 mm2
- Terminal seal : epoxy