ICP3Z1AD2
The ICP3Z1AD2 Panel Switch, part number ICP3Z1AD2, is here to revolutionize your electrical functions. With its smooth, sleek design, this Pushbutton Switch seamlessly integrates into any system. Its category, Pushbutton Switches, highlights its versatility and reliability.
Key Features
- Series: IC
- Terminals: Quick-connect 2.8 x 0.5 mm
- Actuator Shapes: Round, flat
- Contacts: Silver, gold plated
- Electrical Function: Normally open (NO)
- Actuator Colors: Black
Specifications
Distinctive Features:
- Momentary with short case, reduced behind-panel depth
- Tactile feedback
- Flat round actuator for optional marking
- Glossy actuator option (round curved only)
- Sealed to IP67
General Specifications:
- Panel thickness: 1.5 mm (.059) min. 4 mm (.157 max.)
- Total travel: 1.7 mm (.067)+/- 0.3 mm
- Typical operating force: 4 N +/- 2 N
- Low level or mechanical life: 1,000,000 cycles
- Torque: 1,5 Nm max. applied to nut
- Soldering: 320 °C max. for 3 sec
Environmental Specifications:
- Front panel sealing: IP67 according to IEC 60529
- Shock resistance: 100 g according to IEC 512-4, test 6c
- Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
- Salt spray: IEC 512-6, test 11f
- Robustness: IK06 according to EN 50102 (1 joule)
- Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)
Electrical Specifications:
- Max. current/voltage rating with resistive load: 5 A 28 VDC, 70,000 cycles, 0.2 A 48 VDC, 500,000 cycles, 0.5 A 48 VAC, 500,000 cycles
- Initial contact resistance: 50 mΩ max.
- Insulation resistance: 1 GΩ min. at 500 VDC
- Dielectric strength: 1,500 Vrms 50 HZ between terminals
Added to Your Cart