IBR3SAD500
Sealed pushbutton switches with snap-in mount.
Key Features
- Series: IB
- Contacts: AD
- Terminals: Solder lugs
- Actuator Colors: Yellow
- Actuator Shapes: Round, curved
- Bushing And Bezel: Black (std)
- Electrical Function: Normally open (NO)
Specifications
Distinctive Features:
- Snap-in models
- Compact, lightweight
- Tactile feedback
- Sealed to IP54
General Specifications:
- Panel thickness: 0.8 mm (.031) min. - 1.8 mm ( .071) max.
- Total travel: 1.7 mm (.066) +/- 0.3 mm
- Typical operating force: 4 N +/- 3 N
- Low level or mechanical life: 1,000,000 cycles
- Torque (applied to nut) : 1 Nm max. with metal nut U166 1,5 Nm max. with plastic nut U4248
- Soldering : 300 °C max. for 3 seconds
Environmental Specifications:
- Front panel sealing according to IEC 60529: IP54
- Shock resistance: 100 g according to IEC 512-4, test 6c
- Vibration resistance: 10-500 Hz - 10 g according to IEC 512-4, test 6d
- Salt spray: IEC 512-6, test 11f
- Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)
Electrical Specifications:
- Max. current/voltage rating with resistive load: 400 mA 32 VAC - 100 mA 48 VDC
- Initial contact resistance: 50 mΩ max.
- Insulation resistance: 1 GΩ min. at 500VDC
- Dielectric strength: 1,000 Vrms
- Electrical life at full load: 500,000 cycles
Materials:
- Case : thermoplastic UL94-V0
- Actuator : polyamide 6/6
- Bushing/bezel : polyamide 6/6
- Contacts : silver, gold plated
- Terminal seal : epoxy