MTG92AD4
The MT is an environmentally sealed rocker switch that is actuated with a rocking motion. Multiple single functions available. Various contact materials that allow usage from dry circuit applications up to 4A.This sealed rocker switch comes in a single pole double throw (SPDT switch) package and is available in two or three positions momentary and maintained functions.
Key Features
-
Series:
MT
-
Actuators:
Paddle, black
-
Terminals:
Solder lug
-
Bushing finish:
Matte black (std)
-
Contact materials:
Gold plated silver
-
Electrical functions:
ON OFF ON
GET DATASHEET
Specifications
General Specifications:
- Low level or mechanical life : 100,000 cycles
- Panel thickness : 11.5 mm (.452) max.
Environmental Specifications:
- Operating temperature : -40°C to +85°C
Electrical Specifications:
- Max. current/voltage rating with resistive load- Silver contacts (A): 4A 30VDC- Gold plated silver contacts (AD): 4A 30VDC (gold plating withstands up to 100mA 30VDC)- Gold plated brass contacts (CD): 0,4VA 20VAC or DC
- Minimal load:- A contacts: 50mA 10VDC- AD and CD contacts: 10mA 50mV - 10µA 5V
- Initial contact resistance : 10mΩ max.
- Insulation resistance : 1.000 MΩ min. at 500VDC
- Dielectric strength : 1.000 Vrms 50Hz min. between terminals, 1.500 Vrms 50Hz min. between terminals and frame
- Contact bounce : 2ms max.
- Electrical life at full load : 50,000 cycles
Materials:
- Actuator : 6/6 nylon soft touch: thermoplastic elastomer over 6/6 nylon
- Bushing : brass, chrome plated
- Contacts A: silver AD: silver, gold plated CD: brass, gold plated
- Terminal seal : epoxy