BF240SD3BK1200
The BF240SD3BK1200 Joystick is the ultimate gaming accessory that will take your gaming experience to the next level. With its sleek design and advanced features, this joystick offers precise control and unmatched accuracy. The joystick's part number, BF240SD3BK1200, guarantees its quality and durability. Whether you're navigating through a virtual world or engaging in fast-paced battles, this joystick will give you a competitive edge. So why settle for anything less? Choose the BF240SD3BK1200 Joystick and elevate your gaming experience today.
Key Features
- Switching Points: ±12.5 Degrees
- Lever Operation: Spring to Center with D3
- Series: bf
- Insert Color: Black
- Configuration: Inverse Dual Outputs
- Paddle: 74 mm (2.91 in) above the panel
- Gain: ±40%xV
Specifications
Distinctive Features:
- Spring or friction control options
- Two lever heights available
- Inserts available in black, red, blue, yellow & green
- Analog or PWM outputs
- Zero below panel depth
General Specifications:
- Storage: -40°C to 70°C (-40°F to 158°F)
- Operating Temperature: -25°C to 70°C (-13°F to 158°F)
- Seal Above Panel: IP67 (Gasket fitted as standard)
Environmental Specifications:
- EMC Emissions: Complies with EN 61000-6-3:2001 CISPR 22:2005 Class B 30MHz - 11GHz
- Life Cycles: 5 million cycles sprung version only. Detents rated to 2 million cycles
- ESD: Complies with EN61000-4-2 (extended)±8KV (20 contacts) & +/-15KV (20 air discharges)
- EMC Immunity: 100V/m, 80MHz-2.7GHz, 1KHz 80% sine wave modulation, EN 61000-4-3 (extended)
- Vibration: 100Hz - 200Hz @ 0.13g²/Hz, total 3.6gRMS(1 Hour in each of the three mutually perpendicular axis
Electrical Specifications:
- Gain (Output Voltage Span): ±10% x V to ±50% x V
- Output at Center: V/2 ± (5% x Gain)
- Power Supply: 5V ±0.5V Transient free
- Switch Outputs: Open Drain, pulled high within control via 1K5 to 5V, and smoothed to 0V with 100nF
- Sensor Type: Hall effect
- Current Consumption: <20mA
- Loads: Minimum 10K, preferred 100K+
Added to Your Cart