BF150D03BK0500
The BF150D03BK0500 joystick is designed for precision control. With a sleek black design, it adds a touch of sophistication to any panel. The paddle measures 74mm above the panel, allowing for comfortable and ergonomic use. Its gain of 50xV ensures accurate and responsive input. Don't compromise on style or performance with the BF150D03BK0500 joystick.
Key Features
- Gain: 50 XV
- Paddle: 74 mm (0.291in) Above the Panel
- Configuration: Standard Dual Outputs
- Lever Operation: 125-Degree Detents
- Switching Points: 5 Degrees
- Insert Color: Black
Specifications
Distinctive Features:
- Spring or friction control options
- Two lever heights available
- Inserts available in black, red, blue, yellow & green
- Analog or PWM outputs
- Zero below panel depth
General Specifications:
- Storage: -40°C to 70°C (-40°F to 158°F)
- Operating Temperature: -25°C to 70°C (-13°F to 158°F)
- Seal Above Panel: IP67 (Gasket fitted as standard)
Environmental Specifications:
- EMC Emissions: Complies with EN 61000-6-3:2001 CISPR 22:2005 Class B 30MHz - 11GHz
- Life Cycles: 5 million cycles sprung version only. Detents rated to 2 million cycles
- ESD: Complies with EN61000-4-2 (extended)±8KV (20 contacts) & +/-15KV (20 air discharges)
- EMC Immunity: 100V/m, 80MHz-2.7GHz, 1KHz 80% sine wave modulation, EN 61000-4-3 (extended)
- Vibration: 100Hz - 200Hz @ 0.13g²/Hz, total 3.6gRMS(1 Hour in each of the three mutually perpendicular axis
Electrical Specifications:
- Gain (Output Voltage Span): ±10% x V to ±50% x V
- Output at Center: V/2 ± (5% x Gain)
- Power Supply: 5V ±0.5V Transient free
- Switch Outputs: Open Drain, pulled high within control via 1K5 to 5V, and smoothed to 0V with 100nF
- Sensor Type: Hall effect
- Current Consumption: <20mA
- Loads: Minimum 10K, preferred 100K+
Added to Your Cart