Switch guards for 12000 - 3500 - 600H - 6000

Switch guards prevent any inadvertent lever operation. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded bushing and lever length 17,5 (.688) outside bushing.

Main features :

• Models for 2 or 3 positions switches
• 1,5mm holes for wiring a seal optional

Note : For correct switch operation, the switch guard should be adjusted properly by means of 2 nuts.