IQP3F422
The IQP3F422 Panel Switch, with its part number IQP3F422, falls under the category of Pushbutton Switches. Its actuator type is round and flat, which gives it a sleek and modern appearance. In terms of electrical functions, it is normally open (NO), allowing for easy and quick activation. The contacts of the IQP3F422 are silver gold plated, ensuring reliable and efficient performance. With a current rating of 200 mA and a voltage rating of 48 VDC, this panel switch is suitable for a wide range of applications.
Key Features
- Actuator Colours: Black
- Electrical Functions: Normally Open (NO)
- Mounting: Flying Leads
- Bushing Bezel: Black Standard
- Contact Materials: Silver (Gold-Plated)
Specifications
Distinctive Features:
- Latching action models
- Sealed to IP67
- Illuminated or non-illuminated
- Flat round actuator for optional marking
General Specifications:
- Panel thickness :with flat seal: 2.20 mm (.088) max.without flat seal: 3 mm (.118) max.
- Total travel: 2.5 mm (.098) +/- 0,3 mm
- Typical operating force: 5 N +/- 2 N
- Low level or mechanical life: 200,000 cycles
- Soldering: 320 °C max. for 3 sec.
Environmental Specifications:
- Front panel sealing: IP54 according to IEC 60529
- Shock resistance: 100 g according to IEC 512-4, test 6c
- Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
- Salt spray: IEC 512-6, test 11f
- Operating temperature: -40 °C to +85 °C (-40 °F to 185 °F)
Electrical Specifications:
- Max. current/voltage rating with resistive load (gold plated contacts):- Code 4: 100 mA 24 VDC, 200,000 cycles- Code 7: 4 A 12 VDC, 200,000 cycles1 A 48 VDC, 200,000 cycles3 A 48 VDC, 75,000 cycles
- Initial contact resistance: 100 mΩ max.
- Insulation resistance: 1 GΩ min. at 500 VDC
- Dielectric strength: 1,500 Vrms between terminals
Added to Your Cart