FDBP1F1482F0
The FDBP1F1482F0 Panel Switch is designed to provide reliable and efficient electrical functions. With its sleek and compact design, it effortlessly fits into any panel or control unit. The switch offers two positions - OFF and ON - allowing users to easily control the flow of electricity. .
Key Features
- Actuator Colours: Smoke Black
- Actuator Shape: Round, Flat
- Electrical Functions: ON OFF
- Contact Materials: Silver (Gold-Plated)
- Led Control And No Of Poles: LED Linked to Actuator Green if Switch in ON Position, Single Pole
- Led Resistors: No Resistor Supplied
- Model: Snap-in
- Terminals: Solder Lug
Specifications
General Specifications:
- Panel thickness :- Snap-in version : 1.5 (.059) to 2 mm (.078) with panel gasket 2 (.078) to 2.5 mm (.885) without panel gasket- Threaded bushing version :1(.039) to 18 mm (.708) max.
- Total travel : 2.5 mm ± 0.5 mm
- Typical operating force : 8 N ± 2 N
- Low level or mechanical life :- Momentary models : 1 million cycles- Latching models : 200,000 cycles
- Torque : 3 Nm max. applied to nut
Environmental Specifications:
- Front panel sealing :- Threaded bushing version : IP69K according to DIN 40050-9- Snap-in version : IP54 according to IEC 60529 with panel gasket and 2 mm panel thickness
- Operating temperature : -40 °C to +75 °C
Electrical Specifications:
- Max. current/voltage rating with resistive load :- silver contacts (code 2) : 4 A 12 VDC- gold plated contacts (code 4) : 200 mA 12 VDC
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1 GΩ min. at 500 VDC
- Dielectric strength : 1,000 Vrms 50 Hz min.
- Electrical life at full load :- Momentary models : 1 million cycles (gold plated contacts), 400,000 cycles (silver contacts)- Latching models : 200,000 cycles
Added to Your Cart