AV191003A200K
The AV191003A200K Panel Switch is the perfect solution for all your pushbutton switching needs. With its solder lug quick connect terminals, it offers easy installation and reliable connectivity. Whether you're working on a small DIY project or a complex industrial application, this switch provides the versatility and durability you require. Get ready to take control with the AV191003A200K Panel Switch.
Key Features
- Electrical Functions: Normally Open (NO)
- Bushing Actuator Materials: Nickel-Plated Brass Metal Actuator
- Contact Materials: Silver
- Case: Short
- Sealing: IP65
- Terminals: Solder Lug Quick Connect
Specifications
Distinctive Features:
- Momentary NC/NO
- Long life
- Sealed to IP65 and IP69K
General Specifications:
- Torque : 1.5 Nm min.- 4 Nm max. applied to nut
- Panel thickness : 1 (.039) to 11 mm (.433) max.
- Low level or mechanical life : 1,000,000 cycles
- Hand soldering : 300 °C, 3 sec. max.
- Panel cut-out : Ø 19.2 mm (.755) or Ø 22.2 mm (.874)
- Min. pitch for matrix mounting : 30 mm x 30 mm (1.181x1.181) (AV9P & AV9B : 25 mm x 25 mm)
Environmental Specifications:
- Operating temperature : -30 °C to +70 °C
Electrical Specifications:
- Max. current/voltage rating with resistive load :- A contacts : 4 A 12 VDC, 500,000 cycles- C contacts : 2 A 48 VDC, 10,000 cycles
- Approved ratings of models with long case and A contacts (AV..000) :UL-CSA : 4 A 250 VAC - 8 A 125 VAC - 6,000 cycles
- Initial contact resistance : 50 mΩ max.
- Insulation resistance : 1,000 MΩ min. at 500 VDC
- Dielectric strength : 2,000 Vrms 50 Hz min. between terminals and frame2,000 Vrms 50 Hz min. between terminals
Added to Your Cart