BF230SD2BL1200
The BF230SD2BL1200 Joystick, also known as the Paddle, is the perfect tool for precise control. With its 74 mm 291 in height above the panel, it offers comfortable and ergonomic usage. The Gain, or sensitivity, can be adjusted to your preference, with a range of 30 xV. Additionally, the stylish Blue Insert Color adds a touch of personality to your setup. .
Key Features
- Gain: 30 XV
- Paddle: 74 mm (0.291in) Above the Panel
- Configuration: Inverse Dual Outputs
- Lever Operation: Spring to Centre with D2
- Switching Points: 125 Degrees
- Insert Colour: Blue
Specifications
General Specifications:
- Storage: -40°C to 70°C (-40°F to 158°F)
- Operating Temperature: -25°C to 70°C (-13°F to 158°F)
- Seal Above Panel: IP67 (Gasket fitted as standard)
Environmental Specifications:
- EMC Emissions: Complies with EN 61000-6-3:2001 CISPR 22:2005 Class B 30MHz - 11GHz
- Life Cycles: 5 million cycles sprung version only. Detents rated to 2 million cycles
- ESD: Complies with EN61000-4-2 (extended)±8KV (20 contacts) & +/-15KV (20 air discharges)
- EMC Immunity: 100V/m, 80MHz-2.7GHz, 1KHz 80% sine wave modulation, EN 61000-4-3 (extended)
- Vibration: 100Hz - 200Hz @ 0.13g²/Hz, total 3.6gRMS(1 Hour in each of the three mutually perpendicular axis
Electrical Specifications:
- Gain (Output Voltage Span): ±10% x V to ±50% x V
- Output at Center: V/2 ± (5% x Gain)
- Power Supply: 5V ±0.5V Transient free
- Switch Outputs: Open Drain, pulled high within control via 1K5 to 5V, and smoothed to 0V with 100nF
- Sensor Type: Hall effect
- Current Consumption: <20mA
- Loads: Minimum 10K, preferred 100K+
Added to Your Cart