3140RE720
Introducing the 3140RE720 Joystick, the ultimate control device for precision and accuracy. With its sleek design and advanced features, this joystick is perfect for gamers and professionals alike. The Gain technology ensures a smooth and responsive experience, allowing you to easily navigate through complex virtual environments. The Limiter feature provides added control, preventing accidental movements and ensuring optimal performance. The comfortable Handle design fits perfectly in your hand, allowing for hours of comfortable gameplay. And with the circular drop-in Bezel, installation is a breeze. Upgrade your gaming experience with the 3140RE720 Joystick today.
Key Features
- Series: 3
- Handle: Conical
- Handle: E
- Modifier: Guided Feel
- Bezel: Circular (drop-in)
- Gain: ±40%xV
- Limiter: Round
- Configuration: Standard
Specifications
Distinctive Features:
- One, two or three axis
- Analog or PWM outputs
- Low profile less than 20 mm below panel depth
- 5 V or 3.3 V operation
- Metal mechanism
General Specifications:
- Life Cycles: 10,000,000 cycles (5,000,000 for 3 axis joysticks)
- Seal Above Panel: IP66 (dependant on configuration)
Environmental Specifications:
- Operating Temperature: -25ºC to 70ºC (-13ºF to 158ºF)
- Storage Temperature: -40ºC to 70ºC (-40ºF to 158ºF)
- EMC Emission: Complies with EN 61000-6-3:2001, CISPR 22:2005, Class B 30MHz–11GHz
- ESD: Complies with EN61000-4-2 (extended) ±8KV (20 contacts) & ±15KV (20 air discharges)
- EMC Immunity: 100V/m, 80MHz-2.7GHz, 1KHz 80% sine wave modulation, EN 61000-4-3 (extended)
- Vibration: 100Hz – 200Hz @ 0.13g /Hz, total 3.6gRMS (1 Hour in each of the three mutually perpendicular axis)
Electrical Specifications:
- Gain (Output Voltage Span): ±10% x V to ±50% x V
- Output at Center: V/2 ±(5% x Gain)
- Power Supply: 5V ±0.5V Transient free (Configs 1, 3, 4 & 5) or 3.3V ±0.1V (Config 2)
- Center Tap Impedance: 1K1
- Center Detect Output: Pulled high within joystick via 2K2 to +V, and smoothed to 0V with 100nF
- Sensor Type: Hall effect
- Analog PWM CAN J1939 & CANopen outputs
- Current Consumption: 5V <13mA (Two axis) <20mA (Three axis) 3.3V <24mA (Two axis) <40mA (Three axis)
- Loads: Minimum 10K, preferred 100K+
Added to Your Cart