XF52ANZTSBNNHHEAB
The XF Series joystick is a ruggedized finger operated joystick controller specifically engineered for vehicle applications.
Key Features
- Mechanical Features: None
- Handle: Three axis No buttons
- Operating Torque: .05 Nm
- Series: XF
- Handle Rotation: Third axis Z active
- Operation: Two axis
- Centering: Spring Centering
- Output: (1V - 4V) (4V - 1V)
- Termination Mating Wire Harness: Outputs AA- HH - Mating wire harness to flying leads for analog outputs. No connector
- Sealing: IP67 as standard
Specifications
Distinctive Features:
- Prevent accidental lever operation
- Latching
General Specifications:
- Break Out Force: 1.3N (0.3lbf)
- Operating Force: 2.8N (0.63lbf)
- Maximum Applied Force: 350N (78.00lbf)
- Deflection Angle: 36º (18º from center)
- Expected Life: 5 million
- Lever Action: Single spring, omnidirectional
Environmental Specifications:
- Operating Temperature: -40ºC to 85ºC (-40ºF to 185ºF)
- Storage Temperature: -40ºC to 85ºC (-40ºF to 185ºF)
- Sealing (IP): Up to IP67 above panel (subject to final specifications)
- EMC Immunity Level (V/M): EN61000-4-3
- EMC Emissions Level: EN61000-6-3:2001
- ESD: EN61000-4-2
- Output linearity: ±200mV
- Dual output interlinearity (X/Y): ±400mV
- Dual output interlinearity (Z): ±600mV
Electrical Specifications:
- Sensor: Hall effect, single or dual
- Supply Voltage Range: 5VDC±0.01VDC
- Supply Current: 15mA, +10mA per axis (single sensor)
- Reverse Polarity Max: -10VDC
- Transient Overvoltage Max: 16VDC
- Ratiometric Output Voltage: See output options
- Output Impedance: 2Ω
Materials:
- Shaft: Stainless Steel
- Boot: Silicone
- Handles: Glass filled nylon*
- Body: Glass filled nylon *most handles, dependent upon configurations
Mechanical Specifications:
- X / Y Axis
- Break Out Force: 1.3N (0.3lbf)
- Operating Force: 2.8N (0.63lbf)
- Maximum Applied Force: 350N (78.00lbf)
- Deflection Angle: 36º (±18º from center)
- Expected Life: 5 million
- Lever Action: Spring centering, omnidirectional Z Axis
- Break Out Torque: 0.09Nm (0.80lbf in)
- Operating Torque: 0.121Nm (1.07lbf in)
- Maximum Allowable Torque: 9.0Nm (80lbf in)
- Hand Mechanical Angle: 60º (30º from center)
- Expected Life: 5 million
- Handle Action: Spring centering
Added to Your Cart