Manufacturer of human machine interface products
Switches, LED Indicators, Joysticks, Panel solutions
WP series
WP
New product
APEM offers a high-performance switch for interface solutions that must be easily identifiable: The WP Series pushbutton increases visibility of your critical functions with its extra-large activation surface.
This interface allows a quick and clear identification of the function with a large format personalized laser marking and an anodized 25 mm diameter bearing area which can be tinted in blue, black, green or red. The WP series has been developed for military or outdoor applications in extreme climatic conditions and meets the waterproof and reliability needs of these particularly demanding sectors: IP67 and IP69K, 50,000 cycles, double pole, ...
Main features
- Large diameter pusher (25 mm)
- IP67 and IP69K
- Double pole
- Momentary electrical function
- PCB, wire, solderlug outputs
- Compact under panel
Ergonomics 1
Ergonomics 2
General specification
• Torque : 1.25Nm (.922 FT.lb) max applied to nut• Standard panel thickness : 2 mm (.078) max
• Total travel : 2 mm (.078)
Environmental specifications
• Operating temperature: -40 °C to +85 °C (-40°F to +185°F)• Front Panel sealing: IP67 and IP69K according to DIN 40050-9
Electrical specifications
• Max. Voltage rating with resistive load : 28VDC• Max. current rating with resistive load : 4A
• Initial contact resistance : 10mΩ max
• Insulation resistance : 1000MΩ min at 500VDC
• Dielectrical strength :
- 1000Vrms 50Hz min. between terminals
- 2000Vrms 50Hz min between poles
- 2000Vrms 50Hz min. between terminals and frame
• Contact bounce : 2ms max
• Electrical life - Silver contacts (4A 30VDC): 50 000 cycles
Materials
• Case: diallylphtalate (DAP)• Actuator: Alu
• Contact: brass, nickel plated
• Contacts: silver
• Terminal seal: epoxy
Over 65 years of experience
International customer support
Broadest offering of HMI solutions
Integrated industrial processes
Constant innovation
Need help?
Contact us by phone, email or live chat!