Multimec™ 3F

Multimec™ 3F

New product

Multimec™ 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. It also has a right angle version with an optional LED.

Caps that can be mounted on Multimec™ 3F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1P, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1WP, 1X and 1ZC.


Main features

  • h=10.4 mm
  • 10 x 10 mm
  • Momentary NO
  • IP67 sealing
  • 10,000,000 cycle
  • SMD, TH or through-hole RAS
  • illumination possibility

More details

By phone

978-372-1602 East Coast
760-598-2518 West Coast

Monday – Friday 8am to 4pm

Complementary products
  • Multimec™ 5G

    Multimec™ 5G switch has a large diameter snap-on cap retention system and an actuator levelled with the switch body. The switch series has 3 standard actuation forces and is only available in high temperature material in order to stand today´s advanced soldering processes. Furthermore, the switch can be supplied with one or two LEDs integrated on it in...

  • Illumec™ 4F

    illumec™ 4F series is an illuminated switch with the same slide-on cap retention system as Multimec™ 3F series. The illumination is created with one or two integrated chip-LEDs. Caps that can be mounted on illumec™ 4F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1WP, 1X and 1ZC.Main featuresh=10.4 mm 10 x 10 mm Momentary...

More info

Ergonomics 1

Ergonomics 2

Features

General specification

• Through-hole (TH) or surface mount (SMD) or right angle through-hole
• 50 mA / 24 VDC
• Single pole/momentary
• 10,000,000 operations lifetime
• Temperature range: -40/+160 °C
• IP67 sealing
• Actuation force: 3.5 N

Environmental specifications

• Working temperature: -40/+160 °C
• Storage temperature: -40/+160 °C
• Soldering(TH): IEC 68-2-20
• Soldering (SMD): JEDEC J-STD-020C
• ENVIRONMENTAL ENDURANCE IEC 68-2-3
• Temperature: +40 °C
• Humidity: 93% RH
• Duration: 56 Days
• TEMPERATURE CYCLING IEC 68-2-14
• Temperature limit: -55/+85 °C
• Number of cycles: 200
• Exposure time at each temperature: 10 min
• Recovery time before measurements: 16 hrs
• Sealing IEC 529: IP67

Electrical specifications

• Contact resistance: <30 m Ω - typ. 10 m Ω
• Insulation resistance: >10 M Ω
• Recommended load:
Silver: 0.5 - 50 mA 24 VDC
Gold: 0.5μ - 50 mA 24 VDC
• Contact bounce: <2 mS - typically 0.5 mS

Materials

Housing: PPS UL94V0
• Actuator: PPS UL94V0
• Sealing + spring: Silicone rubber
• Contact spring:
Silver: Stainless steel (+ 3μAg)
Gold: Stainless steel (+ 1μAu)
• Fixed contacts:
Silver - SnCu + 2μNI + 3μAg
Gold - SnCu + 2μNI + 1μAu
Terminals: SnCu + 2μNI + 3μSn100

mechanical specifications

• Standard actuation force: 3.5 N typ
• Max. Actuation force: 100 N for 10 sec
• Key travel: 1 mm
• Lifetime: >10,000,000

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Ask our experts via live chat!

Callback request