Illumec™ 4F

Illumec 4F

New product

illumec™ 4F series is an illuminated switch with the same slide-on cap retention system as Multimec™ 3F series. The illumination is created with one or two integrated chip-LEDs.

Caps that can be mounted on illumec™ 4F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1X and 1ZC.


Main features

  • h=10.4 mm
  • 10 x 10 mm
  • Momentary NO
  • IP67 sealing
  • 10,000,000 cycles
  • SMD or TH
  • illuminated

More details

By phone

978-372-1602 East Coast
760-598-2518 West Coast

Monday – Friday 8am to 4pm

Complementary products
  • Multimec™ 5G

    Multimec™ 5G switch has a large diameter snap-on cap retention system and an actuator levelled with the switch body. The switch series has 3 standard actuation forces and is only available in high temperature material in order to stand today´s advanced soldering processes. Furthermore, the switch can be supplied with one or two LEDs integrated on it in...

  • Multimec™ 3F

    Multimec™ 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. It also has a right angle version with an optional LED.Caps that can be mounted on Multimec™ 3F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1P, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1X and 1ZC. Main featuresh=10.4 mm10 x 10 mmMomentary NOIP67...

More info

Ergonomics 1

Ergonomics 2

Features

General specification

• illumination with integrated chip-LEDs
• Through-hole (TH) or surface mount (SMD)
• 50 mA / 24 VDC
• Single pole/momentary
• 10,000,000 operations lifetime
• Temperature range: -40/+160 °C
• IP67 sealing
Actuation force: 3.5 N

Environmental specifications

• Working temperature: -40/+160 °C
• Storage temperature: -40/+160 °C
• Soldering(TH): IEC 68-2-20
• Soldering (SMD): JEDEC J-STD-020C
• ENVIRONMENTAL ENDURANCE IEC 68-2-3
• Temperature: +40 °C
• Humidity: 93% RH
• Duration: 56 Days
• TEMPERATURE CYCLING IEC 68-2-14
• Temperature limit: -55/+85 °C
• Number of cycles: 200
• Exposure time at each temperature: 10 min
• Recovery time before measurements: 16 hrs
• Sealing IEC 529: IP67
• VIBRATION TEST IEC 68-2-6
• Cycles: 10
• Cycles time: 2 hrs

Electrical specifications

• Contact resistance: <30 m Ω - typ. 10 m Ω
• Insulation resistance: >10 M Ω
• Recommended load:
Silver: 0.5 - 50 mA 24 VDC
Gold: 0.5μ - 50 mA 24 VDC
• Contact bounce: <2 mS - typically 0.5 mS

Materials

• Housing: PPS UL94V0
• Actuator: PPS UL94V0
• Sealing + spring: Silicone rubber
• Contact spring:
Silver: Stainless steel (+ 3μAg)
Gold: Stainless steel (+ 1μAu)
• Fixed contacts:
Silver - SnCu + 2μNI + 3μAg
Gold - SnCu + 2μNI + 1μAu
• Terminals: SnCu + 2μNI + 3μSn100

mechanical specifications

• Standard actuation force: 3.5 N typ
• Max. Actuation force: 100 N for 10 sec
• Key travel: 1 mm
• Lifetime: >10,000,000

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!

Callback request