Configurator (118 products)

Actuator

Cap

Illumination

Mounting

Sealing

Function

Product configurator

PCB switches

Showing 73 - 96 of 118 items
  • NDP Series

    The standard profile NDP DIP switch is designed for reliable operation with positive detent action. Available 2 to 12 poles, through hole mounting.Main features2 to 12 wayWashable with tape sealSelf-cleaning wiping contactsGold plated terminals

  • P36 Series

    Sub-miniature Surface Mount Rotary Code SwitchMain features3 actuator typesSmall foot printHigh reliabilitySolder & flux sealed, washable

  • P25 Series

    Sub-miniature Surface Mount Rotary Code Switch.Main features2.5 mm high off the PCBLateral C-contactSMJ & SMT

  • PT65 Series

    Miniature Through Board Rotary Code SwitchMain features4 actuator typesCompact DesignHigh reliability Solder and flux sealed, washable

  • DH1 Series

    Right or left Angle PCB mounting thumb wheel switch.Main featuresDiameter 13 mmWidth 16 mm SMT Gull Wing10 Position BCD

  • P65 Series

    Miniature Through Board & Surface Mount Rotary Code SwitchMain featuresDesigned for higher temperature applicationsSolid PCB pinsHigh reliabilityAbrasion resistant gold-plated contacts

  • IKC Series

    The very low profile IKC J-bend half pitch DIP switch is designed for reliable operation with an extremely small PCB space requirement. Process compatible (withstand IR reflow soldering) and washable (tape seal standard).Main features1,27 mm (.050) terminal to terminal pitchOverall height from PCB : 1,7 mm (.067)Very small PCB space requirementProcess...

  • Multimec™ 5G

    Multimec™ 5G switch has a large diameter snap-on cap retention system and an actuator levelled with the switch body. The switch series has 3 standard actuation forces and is only available in high temperature material in order to stand today´s advanced soldering processes. Furthermore, the switch can be supplied with one or two LEDs integrated on it in...

  • Multimec™ 3C

    Simplicity and reliability makes the Multimec™ 3C an excellent switch for build-in and over-mould solutions. In addition, the switch is great for overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the overlay and not the PCB, which is very cost-effective.Main featuresh=6.4 mm10 x 10 mmMomentary NOIP67...

  • Multimec™ 3E

    Multimec™ 3E series switches have a hole in the switch body for mounting caps. This switch series is used for mounting Varimec™ caps. There are 2400 options in the Varimec™ range.Caps that can be mounted on Multimec™ 3E: Foilmec™ 1Y and Varimec™Main featuresh=6.4 mm10 x 10 mmMomentary NOIP67 sealing10,000,000 cyclesSMD, TH or through-hole RAS

  • Multimec™ 3A

    Multimec™ 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the travel of the 3A switch is 2 mm. Multimec™ 3A series has an actuator levelled with the switch body.Caps mounted on Multimec™ 3A: 1A, 1B+2C/2D, 1M, 1ZA and 1ZBMain featuresh=6.4 mm10 x 10 mmMomentary NOIP67 sealing10,000,000 cyclesTH or SMD

  • Multimec™ 3F

    Multimec™ 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. It also has a right angle version with an optional LED.Caps that can be mounted on Multimec™ 3F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1P, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1WP, 1X and 1ZC.Main featuresh=10.4 mm10 x 10 mmMomentary NOIP67...

  • Multimec™ 5E

    Multimec™ 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body. 5E is only available in high temperature material in order to stand today´s advanced soldering processes.Caps available for 5E are: 1SS, 1PS and 1YS.Main featuresh=6.4 mm10 x 10 mmMomentaryNO or NC/NO (NC/NO function is not sold in...

  • Illumec™ 4F

    illumec™ 4F series is an illuminated switch with the same slide-on cap retention system as Multimec™ 3F series. The illumination is created with one or two integrated chip-LEDs. Caps that can be mounted on illumec™ 4F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1WP, 1X and 1ZC.Main featuresh=10.4 mm 10 x 10 mm Momentary...

  • Ultramec™ 6C

    Ultramec™ is a whole new switch line from MEC. 6C is the first switch in the line. Ultramec™ 6C switch is a low profile switch with crisp sound and feel. It has IP67 sealing, 3 million cycles and pins for accurate mounting with the J-bend terminals. The switch is excellent for under overlay and custom caps as well as when space is limited.Caps that can be...

  • Unimec™ 154xx

    Unimec™ is a reliable switch with a unique contact concept - switch is capable of producing eight different contact functions depending on the PC board layout. Unimec™ switches are known for their crisp, audible, tactile feel.Caps that fit Unimec™: 16300 and 16700.Main featuresh=15.7 mm12.6 x12.6 mmMomentary, latching or quietIP54 sealingUp to 10,000,000...

  • Navimec™

    Navimec™ is a five position navigational switch solution ideal for data entry devices where joystick function is needed. It has a select switch in the middle and four navigational switches around it. The solution is available as a module as well as single parts for own PCB mounting. Illuminated version is also available. We recommend through-hole version...

  • Foilmec™ 1YS

    A square cap with round corners and a flat top designed for using under an overlay. For illumination chip-LEDs on the PCB are required.Foilmec™ 1YS cap series is mounted on Multimec™ 5E series.Main features15.0 x 15.0 mmStandard cap color: white cap with a frosted white lens

  • Aquamec™

    A round front panel sealed to IP67 solution that can be illuminated. Aquamec™ solution is mounted on Multimec™ 5G series.Main features10.1 x 12.5 mmStandard cap colors: black and transparent

  • Varimec™

    Round and square caps with a flat top and rounded edges in 10 total height and 8 above the recess height possibilities - in total 2400 variations.Varimec™ cap series is mounted on Multimec™ 3E series.Main featuresØ5.2/ Ø7.8/ Ø11.6/ 5.2 x 5.2/ 7.8 x 7.8/ 11.6 x 11.6 mmStandard cap colors : blue, grey, yellow, red and black

  • Controlmec™ - 1Z (unsealed)

    Controlmec™ is a round five position integrated PCB switch solution to control a unit, navigate in a display or operate auxiliary equipment.The solution is available as a module as well as single parts for own PCB mounting. Illuminated version is available with a frosted white cap that is painted black and legends are laser etched. We recommend...

  • Controlmec™ - 1ZW (sealed)

    Controlmec™ is a round five position integrated PCB switch solution to control a unit, navigate in a display or operate auxiliary equipment. 1ZW is Controlmec™ with panel sealing.The solution is available as a module as well as single parts for own PCB mounting. Illuminated version is available with a frosted white cap that is painted black and legends...

  • SP series - PCB

    Single and double pole momentary pushbutton switches with silver or gold plated contacts. Panel or PC mount, rated up to 1 amp, UL models available. Main featuresSealed : Secure assembly of the two case parts, Internally sealed bushing, Epoxy sealed terminals Process compatible (plain bushing models) : Wave solderable,  Washable

  • 9100-9200-9500 series - PCB

    Normally open or normally closed models with solder lug, straight PC or right angle PC terminals. Gold plated brass contacts, front panel sealing option available. Main featuresPanel and PC mount models, horizontal or vertical Self-cleaning and butt action contacts Several plunger options

Showing 73 - 96 of 118 items

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Ask our experts via live chat!

Callback request