Configurator (118 products)

Actuator

Cap

Illumination

Mounting

Sealing

Function

Product configurator

PCB switches

Showing 25 - 48 of 118 items
  • NK series

    The smallest changeover switch. Main features Available with flush or raised actuator & traight or right angle PC terminals.Wave solderable.

  • SMT TG series

    Surface mount tiny washable slide switches with single pole, ON-ON or ON-OFF-ON configurations. Gold plated brass contacts standard.Main features Entirely designed for surface mountTape and reel packagingReflow solderable :  High temperature plastic materials,  Tin plated ground plateTerminal coating : tin alloy over nickel platingTerminals...

  • G series

    Miniature slide switches - telecom gradeMain features Single and double pole configurations, for panel or PCBWide variety of contact matérials6 actuator lengths.

  • D162 series

    D162 tact switches feature excellent coplanarity and right angle for pick and place. Main featuresSurface mountNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 NTemperature range : -40 °C to + 90 °CTape and reel packagingCase and actuator material : high temperature 4/6 nylon

  • IKH series

    The very low profile IKH gull wing half pitch DIP switch is designed for reliable operation with very small PCB space requirement. Process compatible (withstand IR reflow soldering) and washable (tape seal standard). Main features 1,27 mm (.050) terminal to terminal pitchOverall height from PCB : 1,6 mm (.063) onlyVery small PCB space requirementProcess...

  • IKN series

    Main featuresLow profile : The lowest case available in 2, 4, 6 and 8 pole versions2 versions : Surface mount models designed for reflow soldering, Through-hole models allowing mixed soldering processWashable by construction Reliable contacts 2 types of packaging : Surface mount models :  Tape and reel (1.000 pieces per reel)...

  • 1A

    A rectangular rocker-action cap that can be combined into a custom keyboard with 1H/1ZA/1M.1A cap series is mounted on Multimec™ 5G series.Main features10.1 x 12.5 mmHinge-type cap retention system - long travel 2mmStandard solid cap colours: blue, green, grey, yellow, white, red and black

  • 1B+2C/2D

    A square rocker-action solution offering full front illumination option with the cap and spot illumination option with the lens in the bezel. Illumination option in the bezel is achieved with an LED on the PCB.1B cap series with 2C/2D bezel is mounted on Multimec™ 5G series.Main features15.1 x 15.1 mmStandard cap colors: blue, green, grey, yellow, white,...

  • 10G

    The simple and aesthetic cap is designed for a 1.5mm front panel. The cap has anti-rotation cut-off for printed caps*. 10G cap series is based on Ultramec™ 6C.Main featuresØ11.5 mmno cap retention systemStandard solid cap colors: blue, green, grey, yellow, white, red and black *no standard print options

  • 1C+2C/2D

    A square rocker-action solution offers spot illumination with the lens in the cap, plus optional spot illumination option also with the lens in the bezel. Illumination option in the bezel is achieved with an LED on the PCB.1C cap series with 2C/2D bezel is mounted on Multimec™ 5G series.Main features15.1 x 15.1 mmStandard cap colors: grey, red and...

  • 1DS

    A round cap with standard print options. The cap has a soft edge and can be fully illuminated.1DS cap series is mounted on Multimec™ 5G series.Main featuresØ9.6 mmStandard cap colors: blue, green, grey, yellow, white, red, black, transparent, frosted white, ultra blue, dusty blue, aqua blue, mint green, tele grey, melon, noble red, metal dark blue, metal...

  • 1ES

    A round cap with a round lens and soft edges.1ES cap series is mounted on Multimec™ 5G series.Main featuresØ9.6 mmStandard cap colors: blue, green, grey, yellow, white, red and blackStandard lens colors: transparent, green, yellow, frosted white and red

  • 1FS

    A round cap with a full front lens and a soft edge. There are many standard reverse printed legend options available.1FS cap series is mounted on Multimec™ 5G series.Main featuresØ9.6 mmStandard cap colors: blue, green, grey, yellow, white, red and blackStandard lens colors: transparent, green, yellow, frosted white and redStandard legend options available

  • 1GAS

    A flat round cap designed for using under an overlay. The rounded edge prolongs the lifetime of the overlay. The cap can be ordered in transparent or frosted white for full illumination.1GAS cap series is mounted on Multimec™ 5G series.Main featuresØ11 mmStandard cap colors: blue, green, grey, yellow, white, red, black, transparent and frosted white

  • 1GCS

    A flat round cap designed for under overlay use. The rounded edge prolongs the lifetime of the overlay. The cap can be ordered in transparent or frosted white for full illumination.1GCS cap series is mounted on Multimec™ 5G series.Main featuresØ15 mmStandard cap colors: blue, green, grey, yellow, white, red, black, transparent and frosted white

  • 1H

    An illuminated rectangular rocker-action cap that can be combined into a custom keyboard with 1A/1ZA/1M.1H cap series is mounted on Multimec™ 5G series.Main features10.1 x 12.5 mmHinge-type cap retention system - long travel 2 mmStandard solid cap colors: grey and blackStandard lens colors: transparent, green, yellow, red and frosted white

  • 1IS

    A fully illuminated round cap with a slightly rounded top in 7 total building height options.1IS cap series is mounted on Multimec™ 5G series.Main featuresØ6.5 mmStandard cap colors: transparent and frosted white

  • 1JS

    A round cap with a rounded edge designed for using under an overlay. The cap has a low total building height and full illumination option.1JS cap series is mounted on Multimec™ 5G series.Main featuresØ9.6 mmStandard cap colors: blue, green, grey, yellow, white, red, black, transparent and frosted white

  • 1KS

    A flat square cap with an optional bezel 2K. In case of the illuminated version there is an option of inserting a custom legend in between the diffuser and the lid.1KS cap series is mounted on Multimec™ 5G series.Main features14.3 x 14.3 mmStandard cap colors: blue, green, grey, yellow, white, red, black and transparent lid with a frosted white diffuser

  • 1KBS

    A convex square cap with an optional bezel 2K. There is also an option of inserting a custom legend in between the diffuser and the lid.1KBS cap series is mounted on Multimec™ 5G series.Main features14.3 x 14.3 mmStandard cap colors: transparent lid with a frosted white diffuser

  • 1KCS

    A concave square cap with an optional bezel 2K. There is also an option of inserting a custom legend in between the diffuser and the lid.1KCS cap series is mounted on Multimec™ 5G series.Main features14.3 x 14.3 mmStandard cap colors: transparent lid with a frosted white diffuser

  • 1LS

    A round cap with a slightly rounded top and a round lens. The cap is available in 7 total building height options. 1LS cap series is mounted on Multimec™ 5G series. Main featuresØ6.5 mmStandard cap colors: blue, green, grey, yellow, white, red and blackStandard lens colors: transparent and frosted white

  • 1M

    A wide rocker-action cap that can be combined into a custom keyboard with 1A/1H/1ZA. 1M cap series is mounted on Multimec™ 5G series.Main features10.1 x 25.0 mmHinge-type cap retention system - long travel 2 mmStandard solid cap colors: blue, green, grey, yellow, white, red and black

  • 1NS

    A tear-drop shaped cap that is excellent for creative layouts for navigation or indicating.1NS cap series is mounted on Multimec™ 5G series.Main featuresØ9.6/□4.9 mmStandard cap colors: grey, black and frosted white

Showing 25 - 48 of 118 items

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Ask our experts via live chat!

Callback request