Switch guards for switch series 3500 - 600H - 6000 - 13000

View larger

Reference: SG 90

Condition: New product

Switch guards prevent any inadvertent lever operation. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded bushing and lever length 17,5 (.688) outside bushing.

Main features :

Models for 2 or 3 psoitins switches
Holes for wiring a seal optional

Note : For correct switch operation, the switch guard should be adjusted properly by means of 2 nuts.

Print
Share the page
Share the page
Switch guards for switch series 3500 - 600H - 6000 - 13000
Switch guards prevent any inadvertent lever operation. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded bushing and lever length 17,5 (.688) outside bushing.

Main features :
Models for 2 or 3 psoitins switches
Holes for wiring a seal optional

Note : For correct switch operation, the switch guard should be adjusted properly by means of 2 nuts.
Recipient :
Name of the recipient ^* :
E-mail address of the recipient ^* :
^* Required fields
or Cancel

Download

Datasheet

3D File

Complementary products

13000 series
High reliability single pole and double pole momentary pushbuttons, with silver or gold plated contacts. Main featuresFor panel or PCBUL and CECC approvedDesigned to European MIL specs.Bushing Ø 6,35 (1/4) and 11,9 (15/32)
More
3500 series
1 and 2 pole configurations available with solder lug, screw or quick connect terminals. Toggle switches designed for outdoor applications. Frontal sealing to IP67 and IP69K by a silicone membrane. Rear sealing to IP64 provided by moulded-in terminals.Main features : Completely sealed switches withstanding 0,1 bar pressure Frontal sealing to IP67 and...
More
6000 series
Toggle switches available with 1, 2, 3 and 4 poles.Main features : screw, solder lug or quick connect terminals silver contactsmatt black finish on actuator and bushingsealing and locking lever optionsneoprene protection capsrated for up to 7 amps with resistive loads
More
600H-600NH series
Industrial toggle switches with high amperage and metal or insulated lever.Main features : Construction : Terminal and contact support are manufactured from a single piece of metal. The contacts are resistance-welded to the terminal for increased mechanical strength.Rating : These switches are suitable for motor loads and power applications up to 15A...
More

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!