LPI series

View larger

Reference: LPI

Condition: New product

This series with the largest actuator and lowest behind-panel depth within the APEM switch range perfectly complements the APEM product portfolio.The LPI series has been developed on a modular base to fit the exact needs of technicians and end-users: more than 300,000 combinations are possible in this way ! Complying with the requirements of the EN81-70 standard (from Disability Discrimination Act), it allows disabled persons to access lifts and buildings more easily.

Main features

Large ergonomic actuator (dia. 35 mm)
Tactile feedback
Low behind-panel depth (21mm max.)
Stylish design
Long Life (5,000,000 cycles for 0,5A version)

More details

Print
Share the page
Share the page
LPI series
This series with the largest actuator and lowest behind-panel depth within the APEM switch range perfectly complements the APEM product portfolio.The LPI series has been developed on a modular base to fit the exact needs of technicians and end-users: more than 300,000 combinations are possible in this way ! Complying with the requirements of the EN81-70 standard (from Disability Discrimination Act), it allows disabled persons to access lifts and buildings more easily.

Main features
Large ergonomic actuator (dia. 35 mm)
Tactile feedback
Low behind-panel depth (21mm max.)
Stylish design
Long Life (5,000,000 cycles for 0,5A version)
Recipient :
Name of the recipient ^* :
E-mail address of the recipient ^* :
^* Required fields
or Cancel

Download

Datasheet

3D File

Complementary products

1000 Series
The 1000 Series is a versatile range of low-cost switch joysticks, ideal for light to medium duty environments where proportional control is not a necessity. Configurable with either single or double pole switching, the 1000 Series can also be specified as screw or bush mounted. There are two construction options, based on the use of either V3 or V4...
More
KR series
Power rocker switches with a state-of-the-art look based on curved shapes. On illuminated versions, laser etching allows direct marking on the rocker, without using lenses.View the video:Main features : an infinite number of symbols available for all rocker colours within a short timea behind-panel depth lower than equivalent models in the...
More

More info

Ergonomics 1

Ergonomics 2

Features

General specification

• Operating force : 2.5 to 5 N (unsealed)
• Total travel : 2 mm ±0.3 mm
• Mechanical life :
1,000,000 cycles min. for 5 A NO/NC
5,000,000 cycles min. for 50 mA NO
• Integrated resistors for illuminated versions
• LED protected from reverse polarity

Environmental specifications

• Environmental protection :
- IP53 for sealed version
- IP40 for unsealed version
• Impact resistance :
- IK06 for NO/NC version
- IK04 for NO version
• Operating temperature : -20 °C to +65 °C
• Storage temperature : -40°C to +70°C

Electrical specifications

• Snap-action, momentary function
• Max. currrent/voltage rating with resistive load :
- 5 A NO/NC version : 5 A 12 VDC - 50,000 cycles / 100 mA 12 VDC - 1,000,000 cycles
- 50 mA NO version : 50 mA 24 VDC - 5,000,000 cycles
• Min. current with resistive load : 0.5 mA at 24 VDC for NO version
• Contact resistance : 100 mΩ max.
• Dielectric strength : 500 Vrms 50Hz between terminals / 1,000 Vrms 50 Hz between terminals and ground
• Insulation resistance : 10 MΩ at 500 VDC

Materials

• Switch block : thermoplastic for 5A NO/NC
• Contacts :
5 A NO/NC : silver, gold plated
50 mA NO : silver
• Actuator crimped symbol : 304L stainless steel

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!