6000 series

View larger

Display all pictures

Reference: 6000

Condition: New product

Toggle switches available with 1, 2, 3 and 4 poles.

Main features :

screw, solder lug or quick connect terminals
silver contacts
matt black finish on actuator and bushing
sealing and locking lever options
neoprene protection caps
rated for up to 7 amps with resistive loads

More details

Print
Share the page
Share the page
6000 series
Toggle switches available with 1, 2, 3 and 4 poles.

Main features :
screw, solder lug or quick connect terminals
silver contacts
matt black finish on actuator and bushing
sealing and locking lever options
neoprene protection caps
rated for up to 7 amps with resistive loads
Recipient :
Name of the recipient ^* :
E-mail address of the recipient ^* :
^* Required fields
or Cancel

Download

Datasheet

3D File

Complementary products

Switch guards for series 12000 - 3500 -...
Switch guards prevent any inadvertent lever operation. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded bushing and lever length 17,5 (.688) outside bushing. Main features : Models...
More
Switch guards for switch series 3500 -...
Switch guards prevent any inadvertent lever operation. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded bushing and lever length 17,5 (.688) outside bushing. Main features : Models...
More
CSG series
The CSG series is a new range of thermoplastic switch guards. Light, practical and modern, they feature anti-tamper wire seal hole as standard. They are intended for use on our 5000M and 600H toggle switches. Main features : Patented design, easier grip even with glovesSide protection avoiding inadvertent actuationNo distortion or break in case of...
More
MSG series
The MSG series is a new range of switch guards combining modern design and robustness, specially dedicated to harsh environments. They are intended for use on our 12000, 3500, 600H and 6000 toggle switches. Main features :APEM patented design Avoid inadvertent operationNo distortion or break in case of crushingResistant to hydrocarbons, acids, saline...
More
Sealing boots
Sealing boots prevent dust, sand and water from getting into switches. On toggle versions, they also prevent ice from blocking lever action. They are compatible with frontal sealing options K and X408. Main features : Sealing boots for toogle, pushbutton or rocker switchesAvailable in a wide range of colours. A sealing ring or washer is standard supplied...
More

More info

Ergonomics 1

Ergonomics 2

Features

General specification

• Torque : 1.50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness : 5 mm (.196) max.

Environmental specifications

• Operating temperature : -40 °C to +85 °C

Electrical specifications

• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength :
2,000 Vrms 50 Hz min. between terminals
3,000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10,000 cycles at full load

Materials

• Case : diallylphthalate (DAP)
• Actuator : brass, chrome plated, black
• Bushing : brass, chrome plated, black
• Contacts : A : silver

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!