Multimec™ 3F

Multimec 3F

New product

Multimec™ 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. It also has a right angle version with an optional LED.

Caps that can be mounted on Multimec™ 3F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1P, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1X and 1ZC.


Main features

  • h=10.4 mm
  • 10 x 10 mm
  • Momentary NO
  • IP67 sealing
  • 10,000,000 cycle
  • SMD, TH or through-hole RAS
  • illumination possibility

More details

Quote Request

Contact us

+44 (0)1844 202400

Monday to Friday 8.30am to 5pm GMT

Complementary products
  • 1GA

    A flat round cap designed for under overlay use. The rounded edges prolong the lifetime of the overlay.1GA cap series is mounted on Multimec™ 3F series.Main featuresØ11 mmStandard cap color:black

  • 1GC

    A flat round cap designed for under overlay use. The rounded edges prolong the lifetime of the overlay.1GC cap series is mounted on Multimec™ 3F series.Main featuresØ15 mmStandard cap color: black

  • 1K

    A flat square cap with an optional bezel 2K. In case of the illuminated version there is an option of inserting a custom legend in between the diffuser and the lid.1K cap series is mounted on Multimec™ 3F or Illumec™ 4F series.Main features14.3 x 14.3 mmStandard cap colors: blue, green, grey, yellow, white, red, black and transparent lid with a frosted...

  • 1KB

    A convex square cap with an optional bezel 2K. there is also an option of inserting a custom legend in between the diffuser and the lid.1KB cap series is mounted on Multimec™ 3F or Illumec 4F™ series.Main features14.3 x 14.3 mmStandard cap colors: transparent lid with a frosted white diffuser

  • 1KC

    A concave square cap with an optional bezel 2K. there is also an option of inserting a custom legend in between the diffuser and the lid.1KC cap series is mounted on Multimec™ 3F or Illumec™ 4F series.Main features14.3 x 14.3 mmStandard cap colors:transparent lid with a frosted white diffuser

  • 1P

    A concave rectangular cap with full illumination option. 1P cap series is mounted on Multimec™ 3F or Illumec™ 4F series.Main features6.5 x 12.5 mmStandard cap colors: blue, green, grey, yellow, white, red, black and frosted white

  • 1Q

    A concave rectangular cap with a square lens.1Q cap series is mounted on Multimec™ 3F or Illumec™ 4F series.Main features6.5 x 12.5 mmStandard cap colors: blue, grey and blackStandard lens colors: transparent and frosted white

  • 1R

    A concave rectangular cap with a round lens.1Q cap series is mounted on Multimec™ 3F or Illumec™ 4F series.Main features6.5 x 12.5 mmStandard cap color: greyStandard lens colors: transparent and frosted white

  • 1N

    A tear-drop shaped cap that is excellent for creative layouts for navigation or indicating.1N cap series is mounted on Multimec™ 3F or Illumec™ 4F series.Main featuresØ9.6/□4.9 mmStandard cap colors: grey, black and frosted white

  • 1S

    A round cap with a slightly rounded top in 3 total building height options. 1S cap series is mounted on Multimec™ 3F or Illumec™ 4F series.Main featuresØ6.5 mmStandard cap colors: black and transparent

  • 1WD

    An ellipse shaped cap with a convex top.1WD cap series is mounted on Multimec™ 3F series.Main features8.0 x 15.2 mmStandard cap colors: grey, black and frosted white

  • Multimec™ 5G

    Multimec™ 5G switch has a large diameter snap-on cap retention system and an actuator levelled with the switch body. The switch series has 3 standard actuation forces and is only available in high temperature material in order to stand today´s advanced soldering processes. Furthermore, the switch can be supplied with one or two LEDs integrated on it in...

  • Illumec™ 4F

    illumec™ 4F series is a special illuminated switch with the same slide-on cap retention system as Multimec™ 3F series. The illumination is created with one or two intgrated chip-LEDs.Caps that can be mounted on illumec™ 4F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1X and 1ZC.Main featuresh=10.4 mm10 x 10 mmMomentary NOIP67...

More info

Ergonomics 1

Ergonomics 2

Features

General specification

• Through-hole (TH) or surface mount (SMD) or right angle through-hole
• 50mA/24VDC
• Single pole/momentary
• 10,000,000 operations lifetime
• Temperature range: -40/+160°C
• IP 67 sealing
• Actuation force: 3.5N

Environmental specifications

• Working temperature: -40/+160°C
• Storage temperature: -40/+160°C
• Soldering(TH): IEC 68-2-20
• Soldering (SMD): JEDEC J-STD-020C
• ENVIRONMENTAL ENDURANCE IEC 68-2-3
• Temperature: +40°C
• Humidity: 93% RH
• Duration: 56 Days
• TEMPERATURE CYCLING IEC 68-2-14
• Temperature limit: -55/+85°C
• Number of cycles: 200
• Exposure time at each temperature: 10 min
• Recovery time before measurements: 16 hrs
• Sealing IEC 529: IP-67

Electrical specifications

• Contact resistance: <30m Ω - typ. 10m Ω
• Insulation resistance: >10M Ω
• Recommended load:
Silver: 0.5-50mA 24VDC
Gold: 0.5μ-50mA 24VDC
• Contact bounce: <2mS - typically 0.5mS

Materials

Housing: PPS UL94V0
• Actuator: PPS UL94V0
• Sealing + spring: Silicone rubber
• Contact spring:
Silver: Stainless steel (+ 3μAg)
Gold: Stainless steel (+ 1μAu)
• Fixed contacts:
Silver - SnCu + 2μNI + 3μAg
Gold - SnCu + 2μNI + 1μAu
Terminals: SnCu + 2μNI + 3μSn100

mechanical specifications

• Standard actuation force: 3.5N typ
• Max. Actuation force: 100N for 10 sec
• Key travel: 1 mm
• Lifetime: >10,000,000

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!

Callback request