8000 series - PCB

View larger

Reference: 8000

Condition: New product

Momentary or alternate action pushbutton switches. Button returns in upper position after actuation.

Main features

with bushing Ø6.35 mm (1/4) and Ø11.9 mm(15/32).
Single pole and double pole models,
momentary or latching action,
solder lug or PC terminals.
Ratings up to 6 amps,
UL option
numerous plunger, bushing and accessory options.

More details

Print
Share the page
Share the page
8000 series - PCB
Momentary or alternate action pushbutton switches. Button returns in upper position after actuation.
Main features
with bushing Ø6.35 mm (1/4) and Ø11.9 mm(15/32).
Single pole and double pole models,
momentary or latching action,
solder lug or PC terminals.
Ratings up to 6 amps,
UL option
numerous plunger, bushing and accessory options.
Recipient :
Name of the recipient ^* :
E-mail address of the recipient ^* :
^* Required fields
or Cancel

Download

Datasheet

3D File

Complementary products

KR series
Power rocker switches with a state-of-the-art look based on curved shapes. On illuminated versions, laser etching allows direct marking on the rocker, without using lenses.View the video:Main features : an infinite number of symbols available for all rocker colours within a short timea behind-panel depth lower than equivalent models in the...
More
Sealing boots
Sealing boots prevent dust, sand and water from getting into switches. On toggle versions, they also prevent ice from blocking lever action. They are compatible with frontal sealing options K and X408. Main features : Sealing boots for toogle, pushbutton or rocker switchesAvailable in a wide range of colours. A sealing ring or washer is standard supplied...
More

More info

Ergonomics 1

Ergonomics 2

Features

General specification

• Torque : 1.25 Nm (.922 Ft.lb) max. applied to nut
• Total travel : 2.70 mm (.106)

Environmental specifications

• Operating temperature : -40 °C to +85 °C

Electrical specifications

• Max. current/voltage rating with resistive load :
- silver contacts : 4 A 30 VDC
- gold plated contacts : 0.4 VA max. 20 VAC or DC
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength :
- 1,000 Vrms 50 Hz min. between terminals
- 2,000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 30,000 cycles at full load

Materials

• Case : diallylphthalate (DAP)
• Actuator : brass, nickel plated
• Bushing : brass, nickel plated
• Housing : stainless steel
• Contacts
A : silver
AD : silver, gold plated
CD : brass, gold plated
• Terminal seal : epoxy

Approvals

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!