TP series

General specification

• Total travel :
- function 2 : 1 mm (.039)
- function 3 : 0.8 mm (.031)
• Strength of terminals : pull-out force - 10 N max.
• Cleaning : solvents or water + detergent
• Wave soldering : 260 °C - 5 sec.

Environmental specifications

• Operating temperature : -30 °C to +85 °C
• Moisture : 21 days 95 % (NFC 20-603 - IEC 68-2-3)

Electrical specifications

• Max. current/voltage rating with resistive load :
- gold plated contacts : 0,4 VA 20 V max. AC or DC
- silver plated contacts : 0,5 A 48 V max. AC or DC
• Minimum load : 10 mA 50 mV - 10 μA 5 VDC
• Contact resistance : 50 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength :
1,000 Vrms 50 Hz min. between terminals and frame
500 Vrms 50 Hz min. between terminals
• Electrical life at full load :
- gold plated contacts : 60,000 cycles
- silver plated contacts : 20,000 cycles

Materials

• Case : PBT
• Actuator : polyamide, glass filled
• Contacts and terminals :
0 : brass, gold plated
1 : brass, silver plated
3 : brass, gold plated (1.27 micron gold)
8 : contact brass, gold plated + tin plated terminals
9 : contact brass, gold plated (1.27 micron gold) + tin plated terminals
• Terminal seal : epoxy