Manufacturer of human machine interface products
Switches, LED Indicators, Joysticks, Panel solutions
SMT TG series
View larger 
SMT TG
New product
Surface mount tiny washable slide switches with single pole, ON-ON or ON-OFF-ON configurations. Gold plated brass contacts standard.
Main features
- Entirely designed for surface mount
- Tape and reel packaging
- Reflow solderable : High temperature plastic materials, Tin plated ground plate
- Terminal coating : tin alloy over nickel plating
- Terminals turned to the outside, preventing the shadow effect in infrared soldering and permitting visual inspection of solder joints
- Distance between case and circuit : 0.55 mm (.021) End stackable with 10.16 mm (.40) pitch
- Available with positioning pins to ensure switch orientation during the reflow process and increasing switch mechanical resistance
- Protected against electrostatic discharges (ESD) up to 10 KV
- Washable : Construction withstands cleaning processes, including hot water under pressure
SMT TP seriesSingle pole pushbutton switches designed for surface mount, with tape and reel packaging. Reflow solderable and washable, ESD protected up to 10KV, available with or without positioning pins.Main features Entirely designed for surface mountTape and reel packagingReflow solderableHigh temperature plastic materialsTin plated ground plateTerminal coating :...
- 5000 series
The widest range in miniature toggle switches diameter 6,35 mm available in a wide range models & amp options..Main features17 actuators including toggles, paddle levers and locking levers in different lengths.5 contact materials from dry circuit to 6A 125VAC and high inrush up to 120A 2 ms. 8 functions including maintained and momentary...
- SMT TL series
Single pole configurations, gold plated brass contacts standard.Main features Entirely designed for surface mount Tape and reel packaging Reflow solderable High temperature plastic materials Tin plated ground plate Terminal coating : tin alloy over nickel plating Terminals turned to the outside, preventing the shadow effect in infrared soldering and...
- SMT TR series
Surface mount tiny washable rocker switches, single pole configurations.Main features Entirely designed for surface mountTape and reel packagingReflow solderableHigh temperature plastic materialsTin plated ground plateTerminal coating : tin alloy over nickel platingTerminals turned to the outside, preventing the shadow effect in infrared soldering and...
Ergonomics 1
Ergonomics 2
General specification
• Actuator travel : 2.60 mm (.102)• Reflow soldering : infrared, vapor phase or infrared convection
• Washable per IEA-RS448-2 :
- water + detergent - preferred
- solvents
Environmental specifications
• Operating temperature : -40 °C to +85 °C• Moisture resistance : 21days per IEC 512-6 test 11c
• Vibration resistance : 10-500 Hz / 10 g per IEC 512-4 test 6d
• Shock resistance : 50 g per IEC 512-4 test 6c
Electrical specifications
• Max. current/voltage rating with resistive load :0,4 VA 20 V max. AC or DC
• Minimum load : 10 mA 50 mV or 10 µA 5 VDC
• Initial contact resistance : 20 mΩ max
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength :
1,000 Vrms. 50 Hz min. between terminals and frame
500 Vrms. 50 Hz min. between terminals
• Electrical life at full load :
- 2 position switches : 60,000 cycles
- 3 position switches : 30,000 cycles
Materials
• Case : high temperature plastic material UL94-V0• Actuator : high temperature plastic material UL94-V0
• Ground plate and positioning pins : steel, tin plated
• Contacts : brass, gold plated
• Terminals : brass, with pure tin plating over nickel barrier
• Rubber seal : silicone, transparent
Over 65 years of experience
International customer support
Broadest offering of HMI solutions
Integrated industrial processes
Constant innovation
Need help?
Contact us by phone, email or live chat!