Features
General specification
• Panel thickness: 1.5 mm (.059) min. , 4 mm (.157 max.)
• Total travel:
Function 3: 1.7 mm (.067) +/- 0.3 mm
Function 5: 1.3 mm (.051) +/- 0.3 mm
• Typical operating force : 6N +/- 2N
• Low level/mechanical life: 1,000,000 cycles
• Torque: 1.5 Nm max. applied to nut
• Soldering: 320°C max. for 3 sec.Environmental specifications
• Front panel sealing: IP67 according to IEC 60529, IP69K according to DIN 40050-9 (non-illuminated) with cap U5125
• Shock resistance: 100 g according to IEC 512-4, test 6c
• Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Robustness (non-illuminated): IK06 according to EN 50102 (1 joule)
• Operating temperature: -40°C to +85°C
(-40°F to 185°F)Electrical specifications
• Max. current/voltage rating with resistive load (gold plated silver contacts):
5A 28VDC, 70,000 cycles
0.2A 48VDC, 500,000 cycles
0.5A 48VAC, 500,000 cycles
• Initial contact resistance: 100 mΩ max.
• Insulation resistance: 1 GΩ min. at 500VDC
• Dielectric strength: 1,500 Vrms
• Contact bounce: 10 msMaterials
• Case: thermoplastic UL94-V0
• Actuator: polyamide 6/6
• Bushing/bezel: zinc die-cast
(zamak), black painted
• Contacts: silver, gold plated (std)
brass, gold plated (for option 104)
• Output wires (flying lead terminals):
F version: AWG20, section 0.6 mm2
W version: AWG24, section 0.23 mm2
• LED wires:
F version: AWG26, section 0.12 mm2
W version: AWG24, section 0.23 mm2
• Lens: polycarbonate
• Terminal seal: epoxy