IP series - latching

IP series - latching View larger

IP latching

New product

Illuminated or non-illuminated latching action pushbuttons for harsh environments, sealed to IP67. Round or square actuator, available in many different colors. Numerous terminal options, gold plated silver contacts.

Main features

  • Latching action: actuator remains in the low position when ON
  • Illuminated and non-illuminated
  • Flat round actuator for optional marking
  • Compact: behind-panel depth less than 20 mm (.787)
  • High brightness illumination
  • Four LED colors

More details

0820 20 30 10

Monday – Friday 9am to 5pm - Central European Time

Complementary products
  • IR series - microswitch
    IR series - microswitch

    The IR series of sealed pushbutton switches is divided into 2 families : standard models and microswitch technology models. Main featuresSealed to IP67Illuminated or non-illuminatedTactile feedbackSquare or round actuatorWide choice of actuator colorsWide choice of illumination colorsEasily customizedOptional marking (actuator marking is available on...

    More
  • IA series
    IA series

    The IA series actuator consists of a polyurethane membrane which depresses when the switch is actuated. The membrane is press fitted onto the bushing, providing an IP67 front of panel seal and ensuring high resistance to frost and external contaminants. The actuator material provides a soft feel and allows easy operation even with gloved hands. The low...

    More
  • Sealing boots
    Sealing boots

    Sealing boots prevent dust, sand and water from getting into switches. On toggle versions, they also prevent ice from blocking lever action. They are compatible with frontal sealing options K and X408. Main featuresSealing boots for toogle, pushbutton or rocker switchesAvailable in a wide range of colours. A sealing ring or washer is standard supplied...

    More
  • IP series - momentary
    IP series - momentary

    Illuminated or non-illuminated momentary action pushbuttons for harsh environments, sealed to IP67. Round or square actuator, available in many different colors. Numerous terminal options, gold plated silver contacts. Main featuresNormally open (NO) or NC/NO combined (non-illuminated only)Variety of terminal optionsFlat round actuator for optional...

    More
More info

Ergonomics 1

Ergonomics 2

Features

General specification

• Panel thickness: 1.5 mm (.059) min. 5.5 mm (.217) max.
• Total travel: 2.5 mm (.098) +/- 0.3 mm
• Typical operating force: 10 N
• Low level/mechanical life : 200,000 cycles
• Torque : 1.5 Nm max. applied to nut
• Soldering : 320°C max. for 3 sec.

Environmental specifications

• Front panel sealing: IP67 according to IEC 60529
• Shock resistance: 100 g according to IEC 512-4, test 6c
• Vibration resistance: 10-500Hz - 10 g according to IEC 512-4, test 6d
• Salt spray: IEC 512-6, test 11f
• Robustness (non-illuminated): IK06 according to EN 50102 (1 joule)
• Operating temperature: -40°C to +85°C (-40°F to 185°F)

Electrical specifications

• Max. current/voltage rating with resistive load:
4A 12VDC, 200,000 cycles
1A 48VDC, 200,000 cycles
2A 48VDC, 100,000 cycles
3A 48VDC, 75,000 cycles
1A 72VDC, 15,000 cycles
• Initial contact resistance: 100 mΩ max.
• Insulation resistance: 1 GΩ min. at 500VDC
• Dielectric strength: 1.500 Vrms between terminals - 1.000 Vrms between terminals and frame

Materials

• Case: thermoplastic, UL 94-V0
• Actuator: polyamide 6/6
• Bushing/bezel: zinc die-cast (zamak), black painted
• Contacts: silver, gold plated
• Output wires (flying lead terminals):
F version: AWG20, section 0.6 mm2
W version: AWG24, section 0.23 mm2
• LED wires:
F version: AWG26, section 0.12 mm2
W version: AWG24, section 0.23 mm2
• Lens: polycarbonate
• Terminal seal: epoxy

Approvals

  • UL

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!

Callback request