Manufacturer of human machine interface products
Switches, LED Indicators, Joysticks, Panel solutions
Configurator (85 products)
Product configurator
Multimec™ 3E series switches have a hole in the switch body for mounting caps. This switch series is used for mounting Varimec™ caps. There are 2400 options in the Varimec™ range.Caps that can be mounted on Multimec™ 3E: Foilmec™ 1Y/1YA and Varimec™Main featuresh=6.4 mm10 x 10 mmMomentary NOIP67 sealing10,000,000 cyclesSMD, TH or through-hole RAS
Multimec™ 3A is for caps with hinges in order to imitate rocker-function switches. Because of this type of caps the travel of the 3A switch is 2 mm. Multimec™ 3A series has an actuator levelled with the switch body.Caps mounted on Multimec™ 3A: 1A, 1B+2C/2D, 1M, 1ZA and 1ZBMain featuresh=6.4 mm10 x 10 mmMomentary NOIP67 sealing10,000,000 cyclesTH or SMD
illumec™ 4F series is an illuminated switch with the same slide-on cap retention system as Multimec™ 3F series. The illumination is created with one or two integrated chip-LEDs.Caps that can be mounted on illumec™ 4F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1X and 1ZC.Main featuresh=10.4 mm10 x 10 mmMomentary NOIP67...
Unimec™ is a reliable switch with a unique contact concept - switch is capable of producing eight different contact functions depending on the PC board layout. Unimec™ switches are known for their crisp, audible, tactile feel.Caps that fit Unimec™: 16300 and 16700.Main featuresh=15.7 mm12.6 x12.6 mmMomentary, latching or quietIP54 sealingUp to 10,000,000...
Ultramec™ is a whole new switch line from MEC. 6C is the first switch in the line. Ultramec™ 6C switch is a low profile switch with crisp sound and feel. It has IP67 sealing, 3 million cycles and pins for accurate mounting with the J-bend terminals. The switch is excellent for under overlay and custom caps as well as when space is limited.Caps that can be...
Multimec™ 5E switch has a small diameter snap-on cap retention system and an actuator extended out of the switch body. 5E is only available in high temperature material in order to stand today´s advanced soldering processes.Caps available for 5E are: 1SS, 1PS, 1YS/1YAS and Rockermec™ solution.Main featuresh=6.4 mm10 x 10 mmMomentaryNO or NC/NO (NC/NO...
Multimec™ 3F series has an actuator extended out of the switch body and uses slide-on cap retention system. It also has a right angle version with an optional LED.Caps that can be mounted on Multimec™ 3F: 1D, 1E, 1F, 1GA, 1GC, 1K, 1KB, 1KC, 1N, 1P, 1Q, 1R, 1S, 1T, 1U, 1V, 1WA, 1WD, 1X and 1ZC. Main featuresh=10.4 mm10 x 10 mmMomentary NOIP67...
Multimec™ 5G switch has a large diameter snap-on cap retention system and an actuator levelled with the switch body. The switch series has 3 standard actuation forces and is only available in high temperature material in order to stand today´s advanced soldering processes. Furthermore, the switch can be supplied with one or two LEDs integrated on it in...
Simplicity and reliability makes the Multimec™ 3C an excellent switch for build-in and over-mould solutions. In addition, the switch is great for overlay as it can still function even if the overlay breaks and an upgrade can be done by changing the overlay and not the PCB, which is very cost-effective.Main featuresh=6.4 mm10 x 10 mmMomentary NOIP67...
Single Switch Module is a module for a single Multimec™ switch and cap.Main featuresModule size: 22 x 37 mmStandard switch: Multimec™ 5G Switches mountable: 3A, 3E, 3C, 3F (non-illuminated), 4F, 5E and 5G
2SS is an extender for Multimec™ 5G series switches and caps.Main featuresH=5-10 mmStandard color: black
Vario support is a mounting system for Unimec™ switches and accessories. The support lets you mount several switches at once and ensures that they are aligned.Vario support is mounted to the back of the panel with bolts. In case of just a few switches PCB is unnecessary, wires can be soldered right to the switch terminals.Main featuresStandard sizes: 1x1...
A square cap with a rounded top and optional front panel sealing to IP65. The 1T cap together with 1V can be designed into a navigation unit or a keyboard.1T cap series is mounted on Multimec™ 3F or Illumec™ 4F series. Main features10.6 x 10.6 mmStandard cap colors: blue, grey, red, black and frosted white
A half-ellipse shaped cap with a rounded top and optional front panel sealing to IP65. The 1V cap together with 1T can be designed into a navigation unit or a keyboard.1V cap series is mounted on Multimec™ 3F or Illumec™ 4F series. Main features10.4 x 13.25 mm Standard cap colors: blue, grey, red, black and frosted white
A flat square cap with an optional bezel 2K. In case of the illuminated version there is an option of inserting a custom legend in between the diffuser and the lid.1K cap series is mounted on Multimec™ 3F or Illumec™ 4F series. Main features14.3 x 14.3 mmStandard cap colors: blue, green, grey, yellow, white, red, black and transparent lid with a...
A convex square cap with an optional bezel 2K. there is also an option of inserting a custom legend in between the diffuser and the lid.1KB cap series is mounted on Multimec™ 3F or Illumec 4F™ series. Main features14.3 x 14.3 mmStandard cap colors: transparent lid with a frosted white diffuser
A concave square cap with an optional bezel 2K. there is also an option of inserting a custom legend in between the diffuser and the lid.1KC cap series is mounted on Multimec™ 3F or Illumec™ 4F series. Main features14.3 x 14.3 mmStandard cap colors:transparent lid with a frosted white diffuser
Over 65 years of experience
International customer support
Broadest offering of HMI solutions
Integrated industrial processes
Constant innovation
Need help?
Contact us by phone, email or live chat!