Manufacturer of human machine interface products
Switches, LED Indicators, Joysticks, Switch Panels
Configurator (121 products)
Product configurator
PCB switches
D162 seriesD162 tact switches feature excellent coplanarity and right angle for pick and place. Main featuresSurface mountNormally open (NO)Current/voltage rating : 50 mA 12 VDC maxOperating force : 1.6 NTemperature range : -40 °C to + 90 °CTape and reel packagingCase and actuator material : high temperature 4/6 nylon
- IKH series
The very low profile IKH gull wing half pitch DIP switch is designed for reliable operation with very small PCB space requirement. Process compatible (withstand IR reflow soldering) and washable (tape seal standard). Main features 1,27 mm (.050) terminal to terminal pitchOverall height from PCB : 1,6 mm (.063) onlyVery small PCB space requirementProcess...
- SMT TL series
Single pole configurations, gold plated brass contacts standard.Main features Entirely designed for surface mount Tape and reel packaging Reflow solderable High temperature plastic materials Tin plated ground plate Terminal coating : tin alloy over nickel plating Terminals turned to the outside, preventing the shadow effect in infrared soldering and...
- IKN series
Main featuresLow profile : The lowest case available in 2, 4, 6 and 8 pole versions2 versions : Surface mount models designed for reflow soldering, Through-hole models allowing mixed soldering processWashable by construction Reliable contacts 2 types of packaging : Surface mount models : Tape and reel (1.000 pieces per reel)...
- 1A
A rectangular rocker-action cap that can be combined into a custom keyboard with 1H/1ZA/1M.1A cap series is mounted on Multimec™ 5G series.Main features10.1 x 12.5 mmHinge-type cap retention system - long travel 2mmStandard solid cap colours: blue, green, grey, yellow, white, red and black
- 1B+2C/2D
A square rocker-action solution offering full front illumination option with the cap and spot illumination option with the lens in the bezel. Illumination option in the bezel is achieved with an LED on the PCB.1B cap series with 2C/2D bezel is mounted on Multimec™ 5G series.Main features15.1 x 15.1 mmStandard cap colors: blue, green, grey, yellow, white,...
- 10G
The simple and aesthetic cap is designed for a 1.5mm front panel. The cap has anti-rotation cut-off for printed caps*. 10G cap series is based on Ultramec™ 6C.Main featuresØ11.5 mmno cap retention systemStandard solid cap colors: blue, green, grey, yellow, white, red and black *no standard print options
- 1C+2C/2D
A square rocker-action solution offers spot illumination with the lens in the cap, plus optional spot illumination option also with the lens in the bezel. Illumination option in the bezel is achieved with an LED on the PCB.1C cap series with 2C/2D bezel is mounted on Multimec™ 5G series.Main features15.1 x 15.1 mmStandard cap colors: grey, red and...
- 57000 series - PCB
VDE approved miniature rocker switches available in single and double pole configurations. Main features: Solder lug, straight and right angle PC terminals. Available with large, medium or small rocker/paddle actuator, in 9 different colours. Silver contactsUL and CSA approvals available.
- PHAP40 series
The PHAP40 is the smallest latching action switch of the APEM range.Main featuresAudible “click” Models with 6 x 6 mm case on request Double pole, double throw Non-shorting contacts Moulded-in terminals
- 1DS
A round cap with standard print options. The cap has a chamfer and can be fully illuminated.1DS cap series is mounted on Multimec™ 5G series.Main featuresØ9.6 mmStandard cap colors: blue, green, grey, yellow, white, red, black, transparent, frosted white, ultra blue, dusty blue, aqua blue, mint green, tele grey, melon, noble red, metal dark blue, metal...
- 1ES
A round cap with a round lens and soft edges.1ES cap series is mounted on Multimec™ 5G series.Main featuresØ9.6 mmStandard cap colors: grey, red and blackStandard lens colors: transparent, green, yellow, frosted white and red
- 1FS
A round cap with a full front lens and a soft edge. There are many standard reverse printed legend options available.1FS cap series is mounted on Multimec™ 5G series.Main featuresØ9.6 mmStandard cap colors: grey, red and blackStandard lens colors: transparent, green, yellow, frosted white and redStandard legend options available
- 1GAS
A flat round cap designed for using under an overlay. The rounded edge prolongs the lifetime of the overlay. The cap can be ordered in transparent or frosted white for full illumination.1GAS cap series is mounted on Multimec™ 5G series.Main featuresØ11 mmStandard cap colors: blue, green, grey, yellow, white, red, black, transparent and frosted white
- 1GCS
A flat round cap designed for under overlay use. The rounded edge prolongs the lifetime of the overlay. The cap can be ordered in transparent or frosted white for full illumination.1GCS cap series is mounted on Multimec™ 5G series.Main featuresØ15 mmStandard cap colors: blue, green, grey, yellow, white, red, black, transparent and frosted white
- 1H
An illuminated rectangular rocker-action cap that can be combined into a custom keyboard with 1A/1ZA/1M.1H cap series is mounted on Multimec™ 5G series.Main features10.1 x 12.5 mmHinge-type cap retention system - long travel 2 mmStandard solid cap colors: grey and blackStandard lens colors: transparent, green, yellow, red and frosted white
- 1IS
A fully illuminated round cap with a slightly rounded top in 7 total building height options.1IS cap series is mounted on Multimec™ 5G series.Main featuresØ6.5 mmStandard cap colors: transparent and frosted white
- 1JS
A round cap with a rounded edge designed for using under an overlay. The cap has a low total building height and full illumination option.1JS cap series is mounted on Multimec™ 5G series.Main featuresØ9.6 mmStandard cap colors: blue, green, grey, yellow, white, red, black, transparent and frosted white
- 25000N series
Miniature professional slide switches for PC boards.Main features Single and double pole configurationsAvailable with flush, high and side actuator, various actuator lengthsWave solderableUL approved models
- 1KS
A flat square cap with an optional bezel 2K. In case of the illuminated version there is an option of inserting a custom legend in between the diffuser and the lid.1KS cap series is mounted on Multimec™ 5G series. Main features14.3 x 14.3 mmStandard cap colors: blue, green, grey, yellow, white, red, black and transparent lid with a frosted white diffuser
- 1KBS
A convex square cap with an optional bezel 2K. There is also an option of inserting a custom legend in between the diffuser and the lid.1KBS cap series is mounted on Multimec™ 5G series.Main features14.3 x 14.3 mmStandard cap colors: transparent lid with a frosted white diffuser
- 1KCS
A concave square cap with an optional bezel 2K. There is also an option of inserting a custom legend in between the diffuser and the lid.1KCS cap series is mounted on Multimec™ 5G series.Main features14.3 x 14.3 mmStandard cap colors: transparent lid with a frosted white diffuser
- 1LS
A round cap with a slightly rounded top and a round lens. The cap is available in 7 total building height options. 1LS cap series is mounted on Multimec™ 5G series. Main featuresØ6.5 mmStandard cap colors: blue, green, grey, yellow, white, red and blackStandard lens colors: transparent and frosted white
- 1M
A wide rocker-action cap that can be combined into a custom keyboard with 1A/1H/1ZA. 1M cap series is mounted on Multimec™ 5G series.Main features10.1 x 25.0 mmHinge-type cap retention system - long travel 2 mmStandard solid cap colors: blue, green, grey, yellow, white, red and black
Over 65 years of experience
International customer support
Broadest offering of HMI solutions
Integrated industrial processes
Constant innovation
Need help?
Ask our experts via live chat!