13000X778 - alternate series

13000X778 - alternate series View larger

13000X778 - alternate

New product

Double pole double throw alternate action pushbuttons with highly reliable contacts suitable for low level or power applications. Their double shell case construction provide extra mechanical strength. This range of professional pushbutton switches is suitable for use in military and other high specification environments.


Associating compact size and alternate function this pushbutton is a good alternative to toggles, which can prove difficult to integrate into the tight cockpits of light armoured vehicles.

Main features

  • Contacts : Highly reliable contacts suitable for low level applications or power applications.
  • Double shell case for high mechanical strength and high electrical insulation.
  • Compact size : The small rear end of the switch allows space saving behind the panel.
  • Matt black finish on body, bushing, plunger and hardware.
  • Panel sealed to IP 67, these switches are frontal sealed by two O-rings and have full rear end sealing.
  • Solder lug or PC terminals

More details

0820 20 30 10

Monday – Friday 9am to 5pm - Central European Time

Complementary products
  • 13000X778 - momentary series
    13000X778 - momentary series

    Double pole double throw momentary pushbuttons with highly reliable contacts suitable for low level applications. Their double shell case construction provides extra mechanical strength. Main featuresApproval CECC 96401-001 : This range of professional pushbutton switches is suitable for use in military and other high specification environments....

    More
  • 12000X778 series
    12000X778 series

    This range of professional toggle switches is suitable for use in military and other high specification environments. CECC and MIL approved, the 12000X778 toggle switch has a double shell case construction and pinned lever for extra mechanical strength and robust seal up to IP67. Available with solid rivet contact: gold plated silver/nickel alloy....

    More
  • Switch guards for switch series 3500 - 600H - 6000 - 13000
    Switch guards for switch series 3500 -...

    Switch guards prevent any inadvertent lever operation. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded bushing and lever length 17,5 (.688) outside bushing. Main features : Models...

    More
More info

Ergonomics 1

Ergonomics 2

Features

General specification

• Total travel : 2.5 mm (.098)
• Torque : 1.50 Nm (1.10 Ft.lb) max. applied to nut
• Panel thickness : 8 mm (.315) max.

Environmental specifications

• Shock test : 50 g - 11 ms (IEC 68-2-27)
• Vibrations : 10-500 Hz - 10 g (IEC68-2-6)
• Operating temperature : -40 °C to +85 °C
• Humidity test : 56 days, 93 % R.H., 40 °C (IEC 68-2-3)
• Salt spray test : 96 hours (IEC 68-2-11)

Electrical specifications

• Max. current/voltage rating with resistive load : 4 A 28 VDC
• Minimum load : 10 mA 50 mV, 10 µA 5 VDC
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1,000 MΩ min. at 500 VDC
• Dielectric strength :
1,000 Vrms 50 Hz min. between terminals
2,000 Vrms 50 Hz min. between poles
2,000 Vrms 50 Hz min. between terminals and frame
• Contact bounce : 2 ms max.
• Electrical life :
- At 4 A 28 VDC : 10,000 cycles
- At low level (50 mV 10 mA) : 150,000 cycles

Materials

• Case : diallylphthalate (DAP) with PBT external shell (epoxy sealed)
• Actuator : brass, black chrome plated
• Bushing : brass, black chrome plated
• Contacts : silver inlay - gold plated over nickel barrier

Approvals

  • CECC

Over 65 years of experience

International customer support

Broadest offering of HMI solutions

Integrated industrial processes

Constant innovation

Need help?
Contact us by phone, email or live chat!

Callback request