Manufacturer of human machine interface products
Switches, LED Indicators, Joysticks, Switch Panels
12000X778 series
12000X778
New product
This range of professional toggle switches is suitable for use in military and other high specification environments. CECC and MIL approved, the 12000X778 toggle switch has a double shell case construction and pinned lever for extra mechanical strength and robust seal up to IP67. Available with solid rivet contact: gold plated silver/nickel alloy. Comprehensive range of sealing boots and security caps available.
Main features
- Approvals: CECC 96201-005 CECC 96201-008 MIL-DTL-3950 MIL-DTL-83731
- Contacts: Highly reliable contacts suitable for low level applications (10mA 50mV - 10μA 5VDC min.) or power applications (2A 250VAC - 4A 125VAC - 4A 30VDC max.)
- Pinned lever: The base of the switch lever is pinned to the bushing, thus earthing the lever to the bushing. This also provides strain relief to protect the switch if accidentally knocked.
- Double shell case: For high mechanical strength and high electrical insulation.
- Compact size: The small rear end of the switch allows space saving behind the panel.
- Finish: Matt black finish on body, bushing, lever and hardware.
- Sealing: Panel sealed up to IP67, these switches are frontal sealed by two O-rings and have full rear end sealing.
- Accessories: A comprehensive range of sealing boots (both full and half-length), locking levers and security caps are available.
13000X778 - momentary seriesDouble pole double throw momentary pushbuttons with highly reliable contacts suitable for low level applications. Their double shell case construction provides extra mechanical strength. Main featuresApproval CECC 96401-001 : This range of professional pushbutton switches is suitable for use in military and other high specification environments....
- 13000X778 - alternate series
Double pole double throw alternate action pushbuttons with highly reliable contacts suitable for low level or power applications. Their double shell case construction provide extra mechanical strength. This range of professional pushbutton switches is suitable for use in military and other high specification environments. Associating compact size and...
- Switch guards for series 12000 - 3500 -...
Switch guards prevent any inadvertent lever operation. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded bushing and lever length 17,5 (.688) outside bushing. Main features : Models...
- Switch guards for switch series 3500 -...
Switch guards prevent any inadvertent lever operation. When the guard is raised, the lever can be operated freely. When the guard is fully depressed, the lever is reset/locked in a stable position. They are designed for use on switches with Ø 11,9 (.468) or Ø 12 (.472) threaded bushing and lever length 17,5 (.688) outside bushing. Main features : Models...
- CSG series
The CSG series is a new range of thermoplastic switch guards. Light, practical and modern, they feature anti-tamper wire seal hole as standard. They are intended for use on our 5000M and 600H toggle switches. Main features : Patented design, easier grip even with glovesSide protection avoiding inadvertent actuationNo distortion or break in case of...
- MSG series
The MSG series is a new range of switch guards combining modern design and robustness, specially dedicated to harsh environments. They are intended for use on our 12000, 3500, 600H and 6000 toggle switches. Main features :APEM patented design Avoid inadvertent operationNo distortion or break in case of crushingResistant to hydrocarbons, acids, saline...
- Sealing boots
Sealing boots prevent dust, sand and water from getting into switches. On toggle versions, they also prevent ice from blocking lever action. They are compatible with frontal sealing options K and X408. Main featuresSealing boots for toogle, pushbutton or rocker switchesAvailable in a wide range of colours. A sealing ring or washer is standard supplied...
Ergonomics 1
Ergonomics 2
General specification
• Torque: 1.50 Nm (1.10 Ft.lb) max. applied to nut• Panel thickness: 8 mm (.314) max. - 3 mm (.118) min.
• Electrical life:
- At 4A 28VDC:
20,000 cycles (10,000 for functions 5, 4-1R, 4-2R)
- At low level (50mV 10mA):
150,000 cycles (switches with 2 maintained positions)
100,000 cycles (switches with 3 maintained positions)
50.000 cycles (momentary functions 7, 8, 4-1R, 4-2R, 5)
Environmental specifications
• Shock test: 50g - 11ms (IEC 68-2-27)• Vibrations: 10-500 Hz - 10g (IEC68-2-6)
• Operating temperature: -40°C to +85°C (-40°F to 185°F)
• Humidity test: 56 days, 93 % R.H., 40°C (IEC 68-2-3)
• Salt spray test: 96 hours (IEC 68-2-11)
• Front panel sealing by two O-rings flatted bush for precise orientation
• Panel seal withstands 1 bar pressure and remains sealed even when the switch is operated.
• Epoxy sealed terminals
• Splash-proof case
Electrical specifications
• Max. current/voltage rating with resistive load: 4A 28VDC• Minimum load: 10mA 50mV, 10μA 5VDC
• Initial contact resistance: 10 mΩ max.
• Insulation resistance: 1,000 MΩ min. at 500VDC
• Dielectric strength:
1,000 Vrms 50 Hz min. between terminals
2,000 Vrms 50 Hz min. between poles
• Contact bounce: 2 ms max.
Materials
• Case: diallylphthalate (DAP) with plastic external shell (epoxy sealed)• Actuator: brass, black chrome plated
• Bushing: brass, black chrome plated
• Contacts: solid rivet - gold plated silver/nickel alloy
Approvals
Over 65 years of experience
International customer support
Broadest offering of HMI solutions
Integrated industrial processes
Constant innovation
Need help?
Contact us by phone, email or live chat!